Atec Olympus-Iplex-RX-RT - Manual (Page 11)

11
Tip Adaptor Optical Specifications
MIL-STD COMPLIANCE
The operating environment performance is confirmed by the following MIL-STD-810F/G and MIL-STD-461F.
No warranty is given as to damage-free under any conditions. Please ask Olympus sales representative for details.
Type Method
Vibration MIL-STD-810F, Method 514.5, Procedure I (General vibration test)
Shock MIL-STD-810G, Method 516.5, Procedure IV (Transit drop test)
Water resistance MIL-STD-810F, Method 506.4, Procedure I (Rain and Blowing rain test)
Humidity MIL-STD-810F, Method 507.4
Salt fog MIL-STD-810F, Method 509.4
Sand and dust MIL-STD-810G, Method 510.4, Procedure I (Blowing dust test)
Icing/freezing rain MIL-STD-810F, Method 521.2
Electromagnetic Interference (EMI)* 1 MIL-STD-461F, RS-103, (Radiated susceptibility test for non-metallic above deck shipboard conditions)
Explosive atmosphere MIL-STD-810F, Method 511.4, Procedure I (Operation in an explosive atmosphere test)
*1. Excluding IV9675RX and IV9675RT.
OPERATING ENVIRONMENT
Operating temperature
Insertion tube
In air: –25 ºC to 100 ºC (–13 ºF to 212 ºF) IPLEX RX
–25 ºC to 80 ºC (–13 ºF to 176 ºF) IPLEX RT
In water: 10 ºC to 30 ºC (50 ºF to 86 ºF)
Other parts than above
In air: –10 °C to 40 ºC (14 ºF to 104 ºF) with battery
0 ºC to 40 ºC (32 ºF to 104 ºF) with AC power adaptor
Relative humidity All parts 15 % to 90 %
Liquid resistance All parts Operable when exposed to machine oil, light oil or 5 % saline solution.
Waterproofing
Insertion tube
Water pressure resistance:
IV94 series — Up to an equivalent to 3.5 m (11.5 ft) in depth
IV96 series — Up to an equivalent to 7.5 m (24.6 ft) in depth
Other parts than above
Operable in blowing rain conditions (Battery compartment must be closed).
Not operable underwater.
OPTICAL TIP ADAPTOR VARIATION
6.0 MM VIEWING TIP ADAPTORS
AT40D-
IV96
AT80D/
NF-IV96
AT80D/
FF-IV96
AT120D/
NF-IV96
AT120D/
FF-IV96
AT80S-
IV96
AT120S/
NF-IV96
AT120S/
FF-IV96
Optical
system
Field of view 40º 80º 120º 80º 120º
Direction of
view
Forward Side
Depth of
field* 1
200 to ∞
mm
9 to ∞ mm
35 to ∞
mm
2 to 200
mm
19 to ∞
mm
15 to ∞
mm
1 to 25 mm 3 to ∞ mm
Distal end
Outer
diameter* 2
ø6.0 mm
Distal end* 3 18.4 mm 18.9 mm 18.8 mm 18.9 mm 18.8 mm 24.2 mm
4.0 MM VIEWING TIP ADAPTORS STEREO TIP ADAPTORS (4.0MM AND 6.0MM) *4
AT80D/
FF-IV94 *4
AT120D/
NF-IV94
AT120D/
FF-IV94
AT100S/
NF-IV94
AT100S/
FF-IV94
AT50D/
50D-IV94
AT50S/
50S-IV94
AT60D/
60D-IV96
AT60S/
60S-IV96
Optical
system
Field of view 80º 120º 100º 50º/50º 60º/60º
Direction of
view
Forward Side
Forward/
Forward
Side/Side
Forward/
Forward
Side/Side
Depth of
field* 1
35 to ∞
mm
2 to 200
mm
17 to ∞
mm
2 to 15
mm
8 to ∞
mm
*4 *4 *4 *4
Distal end
Outer
diameter* 2
ø4.0 mm ø4.0 mm ø6.0 mm
Distal end* 3 19.0 mm 21.7 mm *4 *4 *4 *4
*1. Indicates the viewing distance with optimal focus.
*2. The adaptor can be inserted into a ø4.0 mm and ø6.0 mm hole when it is mounted on the scope.
*3. Indicates the length of the rigid portion at the scope’s distal end when mounted.
*4. To be released in May, 2014.