Atec Sencore-OTC1000 - Manual

OTC1000 ColorPro
Optical Tri-stimulus Colorimeter
1.800.736.2673 or 1.605.339.0100 http://www.sencore.com
Fax: 1.605.339.0317 mailto:[email protected]
Calibrate broadcast displays more accurately than
ever before using Sencore’s non-contact OTC1000
ColorPro Optical Color Analyzer.
Optical Tri-stimulus Color Analyzer Features:
 OTC1000 measurements closely match
human eye response, using highly accurate
tri-stimulus filtered sensors capable of
measuring to extreme low light conditions
 It is fast! Takes continuous constant-rate
(less than 1 second) measurement updates
at light levels down to 0.01 fL
 It is non-contact—using a laser aiming tool
for proper screen alignment. Setup is quick
and straight-forward, with very easy to use
and intuitive GUI

More accurate than devices costing twice as
much (see Standard Observer chart on
back)
Comes with Great Software

Selectable configurations for color space,
color system, test pattern source, CIE
diagram references and correlated color
temperature
 Color Gamut measurement and adjust-
ment wizards

Ambient Light Cancellation—allows you
to accurately calibrate displays regard-
less of ambient light conditions
 Database for capturing “as found” infor-
mation on the display under test

Reporting features and functions
 Software Development Kit available