Can also measure illuminance (jis aa class), For lighting production and adjustment, For evaluating light source characteristics – Atec Konica-Minolta-CL-200A User Manual

Page 3: For color-viewing cabinet maintenance, For led billboard development and maintenance, Pass fail

App

lication

exa

mples

plication

mple

Application

examples

For lighting production and adjustment

When using various types of light sources in a room or open space, it is
sometimes necessary to check the color of the lighting.
By using the CL-200A, it is possible to adjust the lighting color so that the
food in a restaurant looks delicious.

For evaluating light source

characteristics

Evaluation of the light distribution of LED illumination modules or the
illuminance distribution of lighting fixtures can be evaluated.

For color-viewing cabinet maintenance

A color-viewing cabinet like that shown at left is used in industries such
as the printing industry to visually evaluate finished work under controlled
conditions. This color-viewing cabinet provides illumination at a specific
illuminance and color temperature by using fluorescent lamps, halogen
lamps, etc. The CL-200A can be used for the daily maintenance and control
of these lamps as well as to indicate when replacement is needed.

For projector light-source

research and color inspection

The CL-200A can be used to measure the white balance and uniformity of
microprojectors, etc. with internal LED light sources. The ability to connect
multiple receptors using LAN cables enables measurement of not only a
single point in the center, but up to a maximum of 30 points over the entire
projected area.

For LED billboard development

and maintenance

The CL-200A enables quality control of the LED modules for digital signage
to be performed easily. If modules with different color tones are used
together, the billboard will look mottled, but by measuring the chromaticity
and color temperature of modules using the CL-200A and selecting
modules based on measured values, billboard uniformity can be achieved.

Cross-section A

Illuminance (lx)

Horizontal distance (m)

t (

)

-1

-2

-3

300

100

Colors mix to create white light!

Blue light emitted by LED element

Yellow light emitted by phosphor

Package

Electrode

Wavelength (nm)

LED element

Phosphor

PASS
FAIL

Mea

sure

s colo

tem

pera

ture

Eve

n m

easu

res

exci

tatio

n pu

rity!

Mea

sure

s do

mina

wav

elen

gth!

Can also measure illuminance

(JIS AA class)