Atec Panametrics-36DL-Plus - Manual

Call: +44 (0)845 270 2707
Email: [email protected]
www.ashtead-technology.com
Olympus 36DL Plus Ultrasonic Thickness Gauge
Fully compatible, bi-directional data transfer between 26DL plus and 36DL plus.
Highly advanced ultrasonic thickness gauge that combines powerful thickness
measurement features with sophisticated data acquisition and output capabilities
housed in a rugged, water resistant case. It displays thickness measurement and
high resolution A-scan waveform for precise thickness verification.
The Echo-to-Echo feature allows you to make true metal thickness measurements
when the surface is painted or coated. This innovative feature, first introduced by
Olympus, utilizes its line of dual element transducers to ignore the thickness of the
paint or coating layer. Although dual element transducers have long been preferred
for corrosion applications, Olympus has also available single element transducer
capabilities for Echo-to-Echo measurements.
Key Features
Thru-Paint Echo-to-Echo Measurements with
●
dual and single element transducers
Wide Thickness Range from 0.020 to 20
●
inches (0.5 to 500mm)
Fast Minimum Capture Mode
●
Exclusive MinFinder bar visually assists in
●
locating the held Minimum thickness
RF, half wave positive or negative, and full
●
wave rectification
Measurement adjustments on frozen A-Scan
●
for post-processing of information
Both A-Scan waveform and thickness reading
●
in one large Liquid Crystal Display
Applications
Thickness measurement
●
Wall thinning measurement
●
Non-destructive testing
●
Technical Specification
Title Values
Thickness Range 0.5 - 500mm
Material Velocity 0.762 - 13.999mm/m S
Battery 6v rechargeable NiCad battery pack, or field replacement alkaline AA batteries.
Fast Charger 2 hour fast charger with universal voltage
Receiver Bandwidth 1-15MHz (-3dB)
Resolution (0.01 mm) Standard (0.1mm) LOW. Selectable from keypad
Operating Temperature 0 -10° C to +50° C
Min/Max Mode Works in conjunction with FAST Mode for rapid location of minimum or maximum thickness reading
and associated waveform.
Max No. of Stored Values Up to 95,000 thickness readings and/or 1,750 waveforms, or combination of both.
Dimensions