Atec Panametrics-8500 - Manual (Page 2)

MAGNA-MIKE ® 8500 SPECIFICATIONS*
Scan Rate: Up to 16 measurements per
second, selectable
Min Mode: Rapidly locates and displays
Minimum Thickness measurement
Resolution: 0.001 or 0.0001” (0,01 or
0,001mm), selectable
Display: Liquid Crystal Display (LCD), black
on gray, with electroluminescent backlight,
and adjustable contrast. Can display active
reading, Min reading, Alarm status, and
data file information simultaneously
Datalogger: Stores, recalls, clears and
transmits up to 95,000 thickness readings
with 8-character file names and 16
character alphanumeric identification
codes
Data Output: Serial RS-232 port. Baud
rate, parity, and stop bits are all keypad
selectable
On-board Reports: Min, Max, SD, Mean,
Median, File Comparison
Calibration: Two point standard calibration
and up to 8 reference points
Differential Mode: Displays difference
between actual reading and preset
reference value
Alarm Mode: Programmable Hi-Low Alarm
setpoints with audible and visual indicators
Line Power: 100/120/220/240 VAC, 48-62 Hz
Battery: Rechargeable NiCad battery.
Battery duty cycle is 8-16 hrs depending
on backlight usage. Recharge time is 2
hours
Metric/English: Inches or millimeters
Languages: English, French, German, and
Spanish
Operating Temperature: 0˚ to +50˚C
(+32˚F to +122˚F)
Size: 9.375 x 5.45 x 1.5” (238 x 138 x
38mm)
Gage Weight: 2.1 lbs / 0,95 Kg
STANDARD INCLUSIONS
The Magna-Mike Model 8500 Hall Effect
Thickness Gage with Internal Alphanumeric
Datalogger, including:
• Standard Probe (801PR)
• Probe Stand (80PRS)
• Basic Gage Stand (85RPC)
• Probe Cable (851PC)
• Microsoft Windows®/Excel based
Interface Program (WIN8500)
• User Manual (85MAN)
• Pocket Reference Card (85REF)
• NiCad Rechargeable Battery (85BAT)
• External Power Supply/charger for 8500
• RS232 I/O Cable, 9 pin female (8509F)
• Target Ball and Calibration Kit (80ACC-
KIT), including target ball set (1/16”,
1/8”, 3/16” dia), calibration standards:
0.010”/0,25mm, 0.040”/1mm, 0.160”/
4mm (for measurements over
0.160”/4mm, see optional accessories)
OPTIONAL ACCESSORIES
8525F RS-232 I/O Cable, 25 pin
female
85FSW Remote Footswitch - Fits 2
pin Lemo
® connector
80CAL-020 0.020” (0,5mm) calibration
standard
80CAL-080 0.080” (2mm) calibration
standard
80CAL-240 0.240” (6mm) calibration
standard for applications
over 0.160” (4mm) thick
80CAL-NIS NIST-traced calibration
standards (set of six)
85BAT Rechargeable Battery
851PC Spare Probe Cable (for
801PR)
851CC Coiled 12 ft (4m) Probe
Cable (for 801PR)
802PR Probe with second function
button for large test
specimens
802PR-109 Probe, Extended Range
capability to .400” (10mm)
852CC Coiled 12 ft (4m) Probe
Cable (for 802PR series)
852PC Straight 3 ft (1m) Probe
Cable (for 802PR series)
85PRT Thermal Serial Printer with
Cable and Paper (80PP)
80FXV V-Notch Fixture for Probe
Waltham, MA
TEL 781-899-2740 • 800 225-8330 in North America
e-mail: [email protected]
www.panametrics-ndt.com
Printed 2/2004
© 2004 R/D Tech Instruments Inc., All Rights Reserved.
*All specifications are subject to change without notice.
Panametrics, Panametrics-NDT and the Panametrics-NDT logo are trademarks of Panametrics Inc.
Lemo® is a registered trademark of Lemo - USA. Other company or product names mentioned in this
document may be trademarks or registered trademarks of their respective companies
Target Ball Thickness Range Calibrated
Diameter (with standard probe) Accuracy
1/16” 0.0001-0.0900”
(1.59mm) (0.001-2.590mm) ±3%*
1/8” 0.0001-0.1800”
(3.18mm) (0.001-4.570mm) ±2%*
3/16” 0.0001-0.2500”
(4.76mm) (0.001-6.350mm) ±1%*
Accuracy depends upon thickness range.
For detailed specifications see manual.
THICKNESS RANGE AND ACCURACY