Atec FW-Bell-6010 - Manual (Page 2)

Model 6010 Specifications
General Information
Hall
Effe
ct
Ga
u
s
s
m
e
te
rs
Bell Technologies Inc. a SYPRIS company • 6120 Hanging Moss Road • Orlando, Florida 32807 • Tel.: (407) 678-6900 • Fax: (407) 677-5765 • www.fwbell.com
Due to continuous process improvement, specifications subject to change without notice.
Note: * =available ranges depend on probe type.
Specification
Temperature Range
Operating
Storage
0°C to +50°C
20°C to +70°C
Front Panel Display
Viewing area
Dual 3 ¾ digit, alphanumeric LCD
4.1” (10.4 cm) x 2.5” (6.35 cm)
Communication Ports
RS 232 RS 232, Full Duplex
Power
Input Voltage
Frequency
90 Vac to 240 Vac
50/60 Hz
Internal Battery
Life (time between charges)
Rechargeable, Sealed Lead Acid
8 Hours (typical)
Connectors
Probe
Analog Output
RS 232
Circular (Front Panel)
BNC (Rear Panel)
DB 9 (Rear Panel)
Probes
Types
Compatibility
Standard and temperature compensated
Adapters to be available for Model 9200 gaussmeter probes
Size 10” (25.4 cm) W, 4.5” (11.43 cm) H (w feet),
12.5” (31.75 cm) D
Weight (maximum)
Net
Shipping
8.8 lb. (4.0 kg)
13.7 lb. (6.2 kg)
Software LabView Driver
Specification
Measuring Range* 1 mG (0.1 mT) to 300 kG (30T)
Ranges 300 mG (300 mT) 3 kG (300 mT)
30 G (3 mT) 30 kG (3 T)
300 G (30 mT) 300 kG (30 T)
Resolution 1 mG (0.1 mT)
Accuracy (displayed reading)
dc:
ac:
±% of Reading ±Number of Counts
0.25 3
1.0 3
Frequency Response dc 20 kHz
Display Large alpha numeric LCD with
Dual 3 ¾ digit read out
Measuring Units Gauss, Tesla, Ampere/Meters
Analog Output (Corrected)
Output Voltage
Accuracy
dc
ac
Noise
±3.0 V FS (for each range)
1% of reading
2% of reading
4 mVrms
Temperature Measurement 40 °C to +85 °C