Atec Panametrics-Olympus-Epoch-4 - Manual (Page 4)

MEASUREMENTS
Sensitivity: 110 dB Max and Reference
level sensitivity feature with 6 dB or
0.1 dB selectable resolution
Auto Transducer Calibration: Automated
calibration of transducer Zero Offset
and/or Velocity.
Reject: 0% to 80% of full scale in
1% increments
Units: English, Metric, or Microseconds
Material Velocity: 0.025 to 0.6000 in/
μsec (635 to 15240 m/S)
Range: Standard 0.038 inch to 400 inch
(1 mm to 10,000 mm)
Refracted Angle: Fixed settings of 0°, 30°,
45°, 60°, 70°, or variable from 10° to 85°
in 0.1° resolution
Peak Memory: Simultaneous display of
live A-scan at 60 Hz update rate and
peak envelope of A-scan display.
Peak Hold: Freezes Peak Memory echo
envelope for waveform comparison with
live A-scan.
Pulser Type, User Selectable: Tunable
square wave, negative spike excitation.
Pulse Energy: Low (100 V), Medium
(200 V), High (300 V), and Max (400 V)
Damping: 50, 63, 150, and 400 ohms
Rectification: Full Wave, Half Wave
Positive or Negative, and unrectified RF
settings
Analog Bandwidth: 0.05 MHz to 25 MHz
at –3 dB
Filters: Broadband, Narrowband, or
Custom Selectable Low and High Pass
Filters
Test Modes: Pulse Echo, Dual, or Through
Transmission
Alarms: Selectable threshold positive/
negative or minimum depth modes
DISPLAY
Display: 320 pixels (W) X 240 pixels (H),
ELD or LCD screens
Display Update Rate: Minimum 60 Hz
POWER SUPPLY
Power Requirements: AC Mains: 100-120
VAC, 200-240 VAC, 50-60 Hz
Battery: Internal Rechargeable NiMH
battery pack rated at 12 V at 4000 mAH
Battery Operating Time: ELD, 7 hours
nominal. LCD, 10 hours nominal.
2 hour typical Recharge Time.
OUTPUTS
High Speed Parallel Port: Allows rapid
communication to external devices and
B-scan encoder communication.
Analog Output: Keypad selectable
voltage output of depth or amplitude data
VGA Output Port: Connects to standard
VGA monitor or A/V projector.
RS-232 Communications Port: Allows
interfacing with PCs and printers. Max
Baud Rate 38.4.
GENERAL
Keypad: English or International symbols
Languages: Available in keypad selectable
languages: English, French, German,
Spanish, Italian, Russian, Japanese, and a
user-defined custom language.
Transducer Cable Connectors:
Fits BNC or Number 1 Lemo
®
Dimensions:
(ELD) 11.15” H x 6.55” W x 2.6” T
(LCD) 11.15” H x 6.55” W x 2.4” T
Weight: 5.7 lbs. (2.6 Kg) with battery
Operating Temperature:
ELD/ -20°C to 50°C (-4°F to 122°F)
LCD/ 0°C to 50°C (32°F to 122°F)
Storage Temperature: -40°C to 70°C
(-40°F to 158°F) depending on battery
and display
PC Requirements: PC running minimum
Microsoft
® Windows ® XP ® , Microsoft
Windows 2000 ®
Warranty: One year warranty, battery not
included. Optional second year warranty
available.
STANDARD INCLUSIONS
EPOCH 4 Advanced Microprocessor-
Based Ultrasonic Flaw Detector. Includes:
• EP4/MCA Mini Charger Adapter
• EP4/BAT Nickel Metal Hydride
Rechargeable Battery
• EP4/CAL-NIST NIST Calibration
Certificate
• EP4/MAN Instruction Manual
• EP4/TC Transport Case
• EP4/PS Stainless Steel Pipe Stand
• EP4/HS Hand Strap
OPTIONAL ACCESSORIES
EP4/SC Shipping Hard Shell Case
EP4/BAT-AA Alkaline Battery Pack
EP4/EC External Stand-Alone Charger
EP4/RPC Rubber Protective Carrying Case
EP4/PR Printer: 110-120 V
EP4/PRE Printer: 230-240 V
EP4/DP-E Display Protectors (ELD)
EP4/DP-L Display Protectors (LCD)
EP4/C-15VGA-6 VGA Cable
EP4/C-25PRL-6 Parallel Port Cable
EP4/C-9FAT-6 Serial Port Cable
GAGEVIEWPRO-KIT-SERIAL Interface
program including serial cable
Printed 9/2005
© 2005 Olympus NDT, All Rights Reserved.
*All specifications are subject to change without notice.
Panametrics, Panametrics-NDT and the Panametrics-NDT logo are trademarks of Panametrics Inc.
Other company or product names mentioned in this document may be trademarks or registered
trademarks of their respective companies
EPOCH 4 SPECIFICATIONS*
Olympus NDT, Inc.
48 Woerd Ave, Waltham, MA U.S.A.
TEL 781-419-3900 • 800 225-8330 in North America
e-mail: [email protected]
WWW.PANAMETRICS-NDT.COM