Atec Haefely-MSURGE - Manual

MSURGE
Magnetic Impulse Field Test System
MSURGE 1mx1m antenna mounted on support stand shown with a monitor
as EUT (right) and a PSURGE6 as impulse generator (left)
8x20 Surge
EUT Tester
EUT setup
To be used for EMC Tests
requiring impulse Magnetic
Fields.
The MSURGE is an accessory to
either the PSURGE 4010 or
PSURGE 8000 with PIM 100
surge generators. It enables
magnetic field testing up to 3000
A/m as required by
IEC 61000-4-9.
The support stand can also be
used for tests in accordance with
IEC 61000-4-8 and
IEC 61000-4-10
ONE SOLUTION ONE SOLUTION ONE SOLUTION ONE SOLUTION
for
IEC 61000-4-9
EN 61000-4-9
all EN product standards and
many other applications.
FEATURES FEATURES FEATURES FEATURES
up to 3000A/m field strength
standard coil designed for major application as
defined in the IEC document
sturdy construction
horizontal and vertical testing possible
supplied to ISO 9001
The magnetic field test set MSURGE consists of the
magnetic coil and the connecting cables to the current
surge generator.
BENEFITS BENEFITS BENEFITS BENEFITS
software control (when used
together with Haefely EMC
Surge Testers)
single turn coils
only one support stand is
needed for all magnetic field
tests in accordance with
IEC 61000-4-8/9/10
the portable support stand for
the coil is adaptable for all
three magnetic field tests.