Atec Haefely-MAG100 - Manual (Page 2)

Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
[email protected]
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
[email protected]
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. MAG100_2006-05-22.doc
MAG 1OO MAG 1OO MAG 1OO MAG 1OO AUTOMATIC TESTING AUTOMATIC TESTING AUTOMATIC TESTING AUTOMATIC TESTING LARGE EUTs LARGE EUTs LARGE EUTs LARGE EUTs
MAG 100 has a 1m x 1m
square, single turn antenna.
A current of 120A is needed
to feed the coil to produce a
field of 100A/m. MAG 100
includes a current
transformer capable of
delivering 120A from a low
current source.
Magnetic field strength is
defined at the center of a
coil with
±
3dB variation.
Magnetic field is orthogonal
to the coil plane. Coil
dimensions define the
maximum EUT size as being
0.6m x 0.6m x 0.5m.
The MAG 100 can be used
for both vertical and
horizontal plane testing, by
simply rotating the coil
antenna in its mounting on
the (optional) stand.
The MAG 100 can only be
used for continuous mode
testing.
In conjunction with other
Haefely EMC Test products,
magnetic field testing can be
fully or partially automated.
PLINE 1610 used together with
the MAG 100 can provide semi
automatic testing from the
instrument front panel. A
special menu MAG100 is
included in the PLINE 1610
software. Voltages can be
programmed which correspond
to a magnetic field strength at
the center of the coil antenna.
WinFEAT&R software used to
control the PLINE 1610,
means that magnetic field
testing can be automated
with other EMC tests.
To satisfy the needs of
manufacturers with test
objects larger than 0.6m x
0.6m, a coil antenna is
available with dimensions
2m x 2.6m.
The increased antenna size
means that objects up of
1.2m x 1.6m can be tested.
However, because the coil
antenna is still used with
the MAG 100 current
transformer, maximum
current in the coil is 120A.
This results in a magnetic
field of only 36A/m at coil
center.
The larger coil antenna
requires two stands to
support it. It can still be
used for both horizontal
and vertical plane testing.
TECHNICAL SPE TECHNICAL SPE TECHNICAL SPE TECHNICAL SPECIFICATION CIFICATION CIFICATION CIFICATION
Input Voltage range 0 - 230V Maximum EUT size 0.6 x 0.6 x 0.5m
Output Voltage range 0 - 1.2V max field 1m x 1m coil 110 A/m
Output Current range 1 0 - 13A max field 2m x 2.6m coil 36 A/m
Output Current range 2 0 - 130A Input connection 10A IEC
Weight approx. 17 kg
ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION
MAG100 set with 1m x 1m coil antenna 249004
Support stand for coil antenna 249003
Additional coil antenna 2m x 2.6m 249030
WinFEAT&R software 249970