Atec Haefely-PIM155 - Manual

PIM 155
100kHz & 1MHz Oscillating Magnetic Field Module
IEC 61000-4-10 describe an oscillating magnetic
field generator. The oscillating magnetic field is used
to test the immunity of electronic equipment to be
installed in high voltage sub-stations.
Safety is paramount when AC and impulse
voltages are being used. The PIM 155 High Voltage
connections are all designed so no accidental contact
can occur.
PIM 155 with the PSURGE 8000 Surge
Platform can perform all the
programming functions required to
perform IEC and ANSI testing without
the need of a control computer.
A high accuracy current probe is
delivered with the PIM155 to verify the
induction coil currents.
The integration in the WinFEAT&R control and
reporting software package enhances an efficient
set-up and operation of this test system. Most
importantly, the test load can be transferred to a
computer freeing valuable resources.
Features
100kHz & 1MHz frequencies
Magnetic field strength up to 100A/m
Repetition rate of 400Hz @ 1MHz
Variable burst duration
Benefits
International application – Specifically designed
to meet and exceed the requirements of IEC, EN,
and ANSI tests for power line applications.
Safe and Easy - The interlocked HV section and the
specially designed output sockets, allow your
operators to test safely and easily.
Sturdy and Reliable - Careful component selection
ensures that the PIM 155 will continue to operate
under the most strenuous testing conditions.
Report Generation - The unit can automatically
generate test reports without a computer. Add
WinFEAT&R control and reporting software to collect
and collate data in any format you like.
Applications
IEC 61000-4-10
EN 61000-4-10