Atec Montena-PGCS115 - Manual

montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: [email protected]
CS115 Pulse Generator
This test generator is designed to comply with the requirements of the MIL-STD-461 CS115.
The test method CS115 is used to verify the ability of the EUT to withstand pulse excitation on
interconnecting cables. The pulse generator can be ordered with all the accessories in order to
build the full test set-up basically consisting of an injection probe, an attenuator and an
oscilloscope. The generator can be fully controlled by a computer through a RS232 and USB
interface.
SPECIFICATIONS
Type PG-CS115
Standard MIL-STD-461 D / E / F CS115
Charging voltage 0 - 5 kV
Repetition rate 1 - 60 Hz
Rise time (10 - 90 %) ≤ 700 ps
Fall time (90 - 10 %)
≤ 1.5 ns
Pulse duration (50 - 50 %) > 30 ns
Output impedance 50 Ω
Output connector N
Remote control RS232 and USB
Power supply 85 - 264 V
ac
/ 50 - 60 Hz / 150 VA
Dimensions 45 x 19 x 56 cm (W x H x L)
Weight 13 kg