Atec Montena-EMP300K-5-500 - Manual

montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: [email protected]
PCI - Short Pulse Generator 350 kV
This generator is used to measure the performance of conductive points of entry and of
protective devices according to MIL-STD188-125-1/2 (PCI: pulse current injection). It produces
double exponential current pulses of short duration up to 5 kA. It can be fully controlled by a
computer through a RS232 and USB interface. We provide all the necessary accessories like
current probes, coupling and decoupling networks, fibre optic links, etc. The automation
software is also proposed as an option.
SPECIFICATIONS
Type EMP300K-5-500
Standard MIL-STD-188-125-1 and -2 / short pulse
Type Marx + peaking
Peak erected voltage 50 to 350 kV, positive only
Peak short circuit current 5 kA max
Source impedance 60 ohm
Current rise time (short circuit) < 20 ns
Current pulse length (short circuit) 500 - 550 ns (FWHM)
Repetition frequency 1 pulse every 30 sec
Insulation SF
6
and N
2
Output connector custom (connecting bar)
Interface RS 232 and USB
Power rating 210 - 250 V
ac
/ 50 - 60 Hz / 600 VA
Storage / working temperature 5 - 50 °C / 10 - 45 °C
Dimensions (control unit / generator) 45 x 19 x 56 cm / 60 x 42 x 188 cm (W x H x L)
Weight (control unit / generator) 13 / 175 kg