Atec Keytek-MZ-15 - Manual (Page 2)

Single Source Total EMC Solutions.
Experience the many benefits of working with recognized experts in the field of EMC (electromagnetic compatibility) testing.
Our commitment to the discipline is wide ranging; we actively participate on global standards committees, and have helped
define test methodologies to achieve regulatory standards such as CE Mark requirements, as well as company- and
market-driven product quality objectives.
Our goal is to support you with lifelong service — from applications support, calibration services and preventative
maintenance scheduling to full tactical field support.
Thermo Electron can help you reach the next level of success.
KeyTek MiniZap ® Model MZ-15/EC
Feature Benefit
This sheet is for informational purpose only and is subject to change without notice.
© 2004 Thermo Electron Corporation. All rights reserved. Thermo Electron Corporation, Question everything, and Analyze. Detect. Measure. Control.
are trademarks of Thermo Electron Corporation.
Voltage Range ±0.5 to >8 kV, Contact Mode; ±0.5 to 15 kV, Air Discharge
Air Discharge TRUE-ESD ® (<0.3 ns nominal risetime up to 4 kV)
Contact Mode 0.7 - 1.0 ns risetime per IEC plus
FR/CI
™ std <0.3 ns risetime independent of charge voltage;
3.75A/kV ± 10% peak, e.g. 30 A @ 8 kV
RC Networks 150 pF/330 ohm standard (other RC networks available)
Lock On Standard (with safety interlock)
Rep Rate Single shot as well as 1/sec and 20/sec repetitive operation
HV Display Digital LCD display measures actual HV at the tip with
10V resolution, ~3% accuracy
Ground Connect Warning LED indicates ground cable not connected to tester
Power Operates either from 120 VAC, 50/60 Hz or 4 NiCd batteries
with LED charge status indicator. (220/240 VAC, 50/60 Hz
and European plugs optional)
Size 10" x 2.5" x 3.2" (25.4cm x 8.9cm x 8.1cm)
Weight 29 oz (822 gm) nominal, plus case and accessories
CALIBRATORS
DCA-2 Output Calibration Attenuator: network to allow
oscilloscope or meter monitoring of DC stored on the
discharge capacitor (10,000:1 ratio)
CTC-3 Coaxial Current Monitor: IEC 61000-4-2, and ANSI
C63.16 coax monitor for ESD current waveform, with >1
GHz capability. Includes high-peak-power attenuator and
scope cable
FCS-1 Field and Corona Sensor Group: including Common Monitor Unit HEC-1, H-Field
sensor HFS-1, E-field sensor EFS-1 and Pre-Discharge corona sensor CCS-1
ACCESSORIES
TPC-1 True-ESD ® fastest-risetime contact-mode tip
TPF-1 Self-discharge tip
50-MZ Standoff spacer for air-discharge mode
VCP-1 Vertical Coupling Plane (VCP); 0.5m x 0.5m (19.7" x 19.7")
plane, in accordance with IEC 61000-4-2 and ANSI C63.16 ESD
test standards. Includes bench-mount stand with mounting
provisions for the MiniZap, and handles
MZT-11 E-Field (static and dynamic electric field) Simulator Tip Assembly
MZT-12 H-Field (magnetic field) Simulator Tip Assembly
MCA-1 Hard Carrying Case (does not include space for VCP-1, HCP-1, BTS-1, TP-3)
TP-3 Full Target Plane for mounting the CTC-3 coaxial target; 1.5m x 1.5m (59" x 59")
IEC-801-2 or 61000-4-2, and ANSI C63.16
HCP-1 Horizontal Coupling Plane (HCP); 0.8m x 1.6m (31.5" x 63") for use on
non-conducting tabletop under a small EUT, as per IEC 61000-4-2, and ANSI
C63.16. Includes one roll of <0.5mm thick, static-dissipative sheet insulator
Control Technologies Division One Lowell Research Center (978) 275-0800 www.thermo.com/esd
Lowell, MA, 01852 (978) 275-0850 fax
Formerly doing business as Thermo KeyTek