Atec Fischer Custom Comm_F-72 - Manual

The F-72 has a usable frequency range of 100 Hz to
100 MHz. It has a transfer impedance of 5
 from 500
kHz to 100 MHz. This probe can be used to measure
small RF currents in the basic configuration and pulse
currents with wide ranging magnitudes in the other
variations of this current probe.
F-72
Current Probe
Fischer Custom Communications, Inc.
F-72 Specifications
Frequency: 100 Hz – 100 MHz Connector: Type-N
Internal diameter: 67mm DC to 60 Hz: 350 amperes
External diameter: 142mm 400 MHz: 350 amperes
Height: 53mm RF(CW): 100 amperes
Z
t
 
: 5 Pulse
2
: 100 amperes
dB
        
Probe calibrated with 50+j0 Load Impedance
2: Depends upon the pulse width and pulse rep. Rate.
20603 Earl St., Torrance, CA 90503 · Phone: 310-303-3300 Fax 310-371-6268 · email: [email protected]
 Fischer Custom Communications, Inc.
072803DS-F-72
All rights reserved
 Printed in USA
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
100Hz 1kHz 10kHz 100kHz 1M Hz 10M Hz 100M Hz
Frequency
Tran
fer Imp
e
dance (dBo
hms)