Atec MEC-RE40 Series User Manual
End launch adapters re40 series, Description, Specificaitons
Data subject to change without notice
MICROWAVE ENGINEERING CORPORATION
1551 STREET, NORTH ANDOVER, MA 01845 • TEL (978) 685-2776 • FAX (978) 975-4363 •
• BROAD BAND — OCTAVE OR MORE
• LOW VSWR
• HIGH POWER
DESCRIPTION
MEC state-of-the-art End Launch adapters fulfill the need
for in-line units with broadband capability. Their unique
design achieves low profile with short length, low loss and
VSWR.
Of special significance is the inherent ability of these
units to operate over a multi-octave band at high
power levels, making them ideal for EW/ECM
applications where transmission line routing space is
at a premium.
SPECIFICAITONS
MODEL
NO.
FREQUENCY RANGE
(GHz)
WAVEGUIDE
SIZE
VSWR
(MAX.)
BODY LENGTH
(IN.)
RE45
18.0 – 40.0
WRD180C24
1.5 2.0
Max
RE46
11.0 – 26.5
WRD110C24
1.4
2.0 Max
RE40
7.5 – 18.0
WRD750D24
1.3 2.75
Max
RE47
6.5 – 18.0
WRD650D28
1.3
2.65 Max
RE48
5.8 – 16.0
WRD580D24
1.3 3.0
Max
RE41
4.75 – 11.0
WRD475D24
1.25
3.5 Max
RE49
4.75 – 11.0
DR-19
1.25 3.5
Max
RE42
3.5 – 8.2
WRD350D24
1.25
4.8 Max
RE43
2.0 – 4.8
WRD200D24
1.25 6.5
Max
ORDERING INFORMATION
(1) Add the following suffixes to the model number to specify connector and power:
(a) CONNECTOR:
-3 for SMA female -T for TNC female -N for type N
Female
-3M for SMA male -TM for TNC male -NM for type N male
-7 for precision 7mm
-SC for SC female
-SCM for SC male
(b) POWER: -P for high power levels, namely:
SC to 8.2 GHz-800 W av.
N
to 6
GHz-600 av. Derate lineraly to 300 W at 18 GHz.
TNC to 18 GHz-200 W av.
SMA to 18 GHz-50 W av.
EXAMPLE: RE43-SC-P is the model number for the WRD-200D24 Double-Ridge Waveguide to SC female
coaxial connector End Launch Adapter rated at 800 W average power.
(2) Other flanges, connectors and frequency ranges available on request. Alternate tapped
cover flange is standard.
(3) Single ridge waveguide is available on special request.
TYPICAL EXAMPLE: Frequency 2.6-5.2 GHz, VSWR 1.10, Length 1.30”.
END LAUNCH ADAPTERS
RE40 SERIES
RE47
RE47S
DATA
SHEET
No. T74B
Document Outline
- Full Catalog
- Table of Contents
- DOUBLE-RIDGE Waveguide Products
- T111, Standard Double-Ridge Waveguide
- T135 Extended Bandwidth Double Ridge Weveguide Flanges and Components WRD500 and WRD250
- T113 Double-Ridgge Rlange Stock
- T22D Double-Ridge & MEC Flatguide Flanges & Waveguide
- T55C, R90 F90 Series Double-Ridge Waveguide MEC Flatguide Gaskets
- T34E, R10 R120 R130 R150 Series Double Ridge Straight Sections, Bend and Twists
- T8F, R30 Series Double-TO-Rectangular Waveguide Transitions
- T7E, R40 Series Doulbe-Ridge Waveguide-to-Coaxial Adapters
- T74B, RE40 Series End Launch Adapters
- T15E, R50 R50-S Series Waveguide Power Samplers
- T9E, R80 Series Waveguide Terminations
- T14F, R100 R100-L Series Magic TEE Hybrids
- T12E Waveguide Broadwall Directional Couplers
- T13E Waveguide Pressure Windwos
- T26C, R280 Series Waveguide Sliding and Fixed Mismatches
- T68C, R600 R620 Series Ultra-Flat Directional Couplers
- T80A, R810 Series Reflectometer Test Sets