Atec Megger-MFT1500 Series - Manual (Page 4)

MFT1500 Series
Combined Insulation, Loop & RCD Tester
RCD ranges (to EN-61557-6)
Supply:
100 V - 270 V 45Hz to 65Hz
Ranges:
1000 mA, 500 mA, 300 mA, 100 mA, 30 mA, 10 mA
Type: 1/2 I - 1/2 times the selected RCD rated current.
I - One times selected RCD rated current.
5I - Five times I RCD rated current.
RAMP - A ramp test that displays actual trip current .
DC sensitive - A DC test current at 1/2 I, I and 5I .
Current accuracy:
No trip ( 1 / 2 I) -8% to -2%
Trip (I) and 5I +2% to +8%
Trip time accuracy:
±1% ±1 ms
Touch (Fault) voltage: 0 V to 100 V error ±5% to +15% ±0.5 V
Selection: 25 V or 50 V
Power supply
8 x 1.5 V Alkaline cells type LR6
Fuses
Replaceable 500 mA (F) HBC 10 kA 500 V
Non-replaceable 7 A (SIBA 70-065-63) x 2
Non-replaceable 1 A
Remote probe: MFT1502/2 and MFT1552 only
Torch feature: 5mm WHITE LED 1500 mcd
Safety: CLASS 1 LED to IEC 60825:2001 Interchangeable tips
Battery: 1 x 9 V Alkaline cell type PP3
Fuse: Non-replaceable 7 A (SIBA 70-065-63)
Safety
Double insulated to IEC61010-1-2001, Installation Category III,
300 V phase to earth, 500 V phase to phase.
In addition Probe designed to meet IEC 61010-031-2002, Double
insulated to Installation Category III, 300 V phase to earth, 500 V
phase to phase.
EMC
In accordance with IEC 61326 including amendment No. 1
Environmental
Operating range: -5 to +40ºC
Operating humidity: 90% RH at 40ºC max
Storage temperature: -25 to 65ºC
Maximum altitude: 2000 m
Dust and water protection: Instrument IP54, probe no rating
Physical
Dimensions:150 mm high x 85 mm wide x 235 mm deep
(6 in. x 3.5 in. x 9.5 in.)
Weight:1440 gms (3lb)
EN61557:
Complies with the following parts of 61557, electrical safety in
low voltage systems up to 1000 V a.c. and 1500 V d.c.-
Equipment for testing, measuring or monitoring of protective
measures:-
Part 1- General requirements
Part 2- Insulation resistance
Part 3- Loop resistance
Part 4- Continuity
Part 6- Residual current devices (RCD)
Part 10- Combined measuring equipment
The Bluetooth word mark and logo are owned by the Bluetooth SIG. Inc.
and any use of such marks by Megger is under licence.
Item (Qty) Order No.
Multifunction tester standard MFT1501/2
Multifunction tester with illuminated switch probe
MFT1502/2
Multifunction tester standard (European) MTF1501/2E
Multifunction tester with illuminated switch
probe (European) MFT1502/2E
Multifunction tester with automatic RCD testing MFT1552
Multifunction tester with automatic
Bluetooth downloading MFT1553
Accessories included with MFT1501
User guide on CD 6172-831
3 wire test lead
Crocodile clips (red, black and green)
Mains plug (BS1363) test lead
Item (Qty) Order No.
Additional accessories with MFT1502/MFT1552/MFT1553
As MFT1501/2 plus:
Illuminated switched probe
Instrument/document carry case
Optional accessories for MFT1500 Series
PowerSuite On-site (MFT1553 only) 6111-777
Replacement 3 wire test lead set 6220-796
Fused prod and clip set 6180-405
Standard switched probe 6220-836
Illuminated switched probe 6311-089
Test lead with Schuko plug 6231-593
Test lead with UK mains plug 6220-740
Test lead with USA mains plug 6220-643
Earth bond test lead set 6231-586
Instrument/document carry case 6420-143
Illuminated probe tip set 6121-562
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1019 USA
T 800 723 2861 (USA only)
T +1 214 333 3201
F +1 214 331 7399
OTHER TECHNICAL SALES OFFICES
Norristown USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA, Madrid SPAIN
and the Kingdom of BAHRAIN.
Registered to ISO 9001:2000 Cert. Q 09290
Registered to ISO 14001:1996 Cert. EMS 61597
MFT1500_SERIES_DS_en_V07
Megger is a registered trademark
ORDERING INFORMATION