Atec High-Voltage-DTS-60AF - Manual

HIGH VOLTAGE, INC. 31 County Rt. 7A • Copake, NY 12516 • (518) 329-3275 • Fax: (518) 329-3271
E-Mail: [email protected] •
Web: www.hvinc.com
Specifications, sizes, weights and features may vary slightly in the interest of continuous product improvement.
Automatic Oil Dielectric Tester
Model No. DTS-60A(F)
The DTS-60A is a fully automatic liquid dielectric test set, typically used for testing the voltage breakdown
level of insulating oils. The most commonly used testing standards are preprogrammed into the controls.
Just hit the start button and the test is performed. Custom test sequences can also be programmed. The
results are stored internally for downloading to a computer and/or for printing on the printer included.
Features
Specifications
High Voltage, Inc. designs and manufactures
high voltage test equipment for utility and
industrial applications. Also available are two
other Oil Dielectric Tester models, Very Low
Frequency (VLF) AC test sets, AC and DC
hipots, Aerial Lift testers, Cable Fault Locators,
and other products.
• Clear and easy to use controls
• 128 x 64 dot matrix crystal display
• 10 preprogrammed standard test sequences
ASTM D877/87, ASTM D1816/84, IEC 156/63, IEC 156/95,
VDE 0370-P5/92, CEI 10-1/73, IRAM 2341/72, UTE C27-221/74,
RVHP 1985, PN-77/ED4408
• Internal memory holds last 50 tests w/ RS232 interface
• User definable test sequences
• Ambient temperature sensor
• English, German, Spanish, French, Greek
• Thermal printer included
Input: 120 V, 50/60 Hz, 7 amps
(F) 230 V, 50/60Hz, 3 amps
Output: 0 – 60 kVac, 800 VA resistive
Voltage Rise: Variable. 0 – 5 kV/s in .1 kV/s steps
Shutdown time: 4.2 ms
Voltage Accuracy: 0.5%
Size:
15 ” w x 14” d x 11.5” h, 65 lbs
381 mm x 356 mm x 292 mm, 29 kg
Operating temp: -14º F to 104º F, -10º C to 40º C
Oil Cups
60 kV & 100 kV manually operated
Oil Dielectric Testers also available