I-v400, General specifications – Atec HTInstruments_I-V400 User Manual
Page 3
I-V400
Rel. 1.07 – 18/06/12
I-V curve checker and IVCK test
Pag 3 of 3
HT ITALIA SRL
Via della Boaria 40 - 48018 Faenza (RA)- Italy
Tel: +39-0546-621002 - Fax: +39-0546-621144
email: [email protected] - web: www.ht-instruments.com
3. GENERAL SPECIFICATIONS
DISPLAY AND MEMORY:
Features:
128x128pxl custom LCD with backlight
Memory capacity:
256kbytes
Saved data:
249 curves (I-V curve test), 999 IVCK
POWER SUPPLY:
SOLAR I-V internal power supply:
6x1.5V alkaline batteries type LR6, AA, AM3, MN 1500
Autonomy of SOLAR I-V:
> 249 curve (I-V curve test), 999 IVCK test
approx 120 hours (yield test)
SOLAR-02 power supply:
4x1.5V alkaline batteries type AAA LR03
SOLAR-02 max recording time (@ IP=5s): approx 1.5h
OUTPUT INTERFACE
PC communication port:
optical/USB
Interface with SOLAR-02 :
wireless RF comunication (max distance 1m)
MECHANICAL FEATURES
Dimensions (L x W x H):
235 x 165 x 75mm
Weight (batteries included):
1.2kg
ENVIRONMENTAL CONDITIONS:
Reference temperature:
23°C
5°C
Working temperature:
0°
40°C
Working humidity:
<80%HR
Storage temperature (batt. not included):
-10
60°C
Storage humidity:
<80%HR
GENERAL REFERENCE STANDARDS:
Safety: IEC/EN61010-1
Safety of measurement accessories:
IEC/EN61010-031
I-V curve measurement:
IEC/EN60891 (I-V curve test)
IEC/EN60904-5 (Temperature measurement)
Insulation: double
insulation
Pollution degree:
2
Overvoltage category:
CAT II 1000V DC, CAT III 300V AC to ground
Max 1000V among inputs P1, P2, C1, c2
Max altitude of use:
2000m
This instrument complies with the requirements of the European Low Voltage Directives 2006/95/EEC
(LVD) and EMC 2004/108/EEC