Atec Hipotronics-TDR-1170 User Manual
Page 2
European Contact
Locate your local
USA Contact
Haefely Test AG
Lehenmattstrasse 353
CH-4028 Basel
Switzerland
+ 41 61 373 4111
+ 41 61 373 4912
|
sales representative at
www.high-voltage-hubbell.com
Hipotronics Inc.
1650 Route 22
PO Box 414
Brewster, NY 10509 USA
+ 1 845 279 8091
+ 1 845 279 2467
|
Hipotronics has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice
TDR1170-DS / 04.2009
TECHNICAL SPECIFICATIONS
General
Input Voltage:
90 to 250 V AC, 50/60Hz
VP Range:
98ft./
µs to 492ft./µs
Accuracy: <
+ 1% of cable length
Pulse Amplitude:
25 V into 50W
Measuring Range:
1 ft. to 160,000 ft.
Pulse Width:
50ns to 10
µs
Units of Measure:
Feet, Yards, Meters
Sample Rate:
12.5 to 30ms
Trigger Delay:
1 to 30ms
Memory Modes:
32 sets of 1 or 3 phase
Setup:
16 setup options
RS232 Port:
Download traces to PC
Monitor: LCD Display 10 inch
diag.
Weights and Dimensions (W x H x D, net weight, ship weight)
Standard 19” rack
19” x 10.5” x 7” (48 x 26 x 18 cm)
18 lbs (8.2 kg)
lbs (kg)
SCOPE OF SUPPLY
Qty.1 TDR1170 in standard 19” rack mount cabinet
Qty.4 RG58/U BNC-BNC cable
Qty.1 Serial interface cable and input line cord
Qty.1 Operations Manual and TDR-PC interface software
ORDERING INFORMATION
System
Time Domain Reflectometer
TDR1170-A
TDR1170-B
Accessories
HV Coupler
HVC4100 series
Cable Fault Locating (Thumper)
CF or CET series
Cable Reels
8100
Accessory Connectors
SYSTEM DISPALY
MEASURING SETUP DIAGRAM
Cable Radar
(TDR)
Model 1170