Atec HV-Diagnostics-TD Series - Manual (Page 4)

271 Rope Mill Pkwy, Suite 2, Woodstock, GA, 30188, USA
Tel. +1 678 445 2555 • Fax +1 678 445 2557
Email: [email protected]
www.hvdiagnostics.com
TD30 - TD60 - TD90
Technical Data
Technical Data for TD Range of Diagnostic Testing Equipment
Note: Due to continuous development the information detailed in this document may change without notice.
Model TD30 TD60 TD90
Ordering Information (Part #) 700 003 706 003 709 003
Power Supply 2 "C" Type Batteries
Rated Operating Voltage
RMS:
Peak:
1-23kV
33kV
1-44kV
62kV
1-64kV
90kV
Voltage Measurement
Resolution:
Accuracy:
0.1kV
1% (of reading)
Current Measurment
Resolution:
Accuracy:
1µA RMS
1% (of reading)
Frequency Measurement
Range:
Resolution:
0.01 to 0.1Hz
0.01Hz
Tan Delta / Dissipation Factor
Measurement
Resolution:
Accuracy >15nF:
<15nF:
1 x 10 -5
6 1 x 10 -4
6 3 x 10 -4
Minimum Load 5nF
Weight 7 lbs / 3 kgs 11 lbs / 5 kgs 24 lbs / 11 kgs
Dimensions (Length x Diameter)
9.5" x 3.5" /
240 x 85mm
18" x 5" /
450 x 120mm
26” x 5” /
660 x 120mm
Computer Interface Bluetooth ™
Accessories Included
Integrated HV and Grounding Cable
Bluetooth USB Dongle
TD Control Center Software
Operating Manual
Corona Protection
Standards
Shock:
Vibration:
EMC:
Safety:
IEC68-2-27
IEC68-2-6
IEC6100-4-2, IEC6100-4-4, EN55011
EN60950, EN50191, EN61010-1
Environmental
Storage:
Operating:
Humidity:
-13ºF to 158ºF / 25ºC to 70ºC
23ºF to 113ºF / -5ºC to +45ºC
80% RH non-condensing