Atec Phenix-HC Series - Manual (Page 2)

www.phenixtech.com
© Copyright – Phenix Technologies, Inc. 2/2012
Branch Offices
phenix systems Ag
Riehenstrasse 64, 4058 Basel, Switzerland
ph: +41.61.383.2770 • Fx: +41.61.383.2771
[email protected]
phenix Asia
Zhong Cheng Rd, Sec 1, No 177, 2F, Taipei 11148 Taiwan
ph: +886.2.2835.9738 • Fx: +886.2.2835.9879
[email protected]
World Headquarters
phenix Technologies, inc.
75 Speicher Drive
Accident, MD 21520 USA
ph: +1.301.746.8118
Fx: +1.301.895.5570
[email protected]
High Voltage • High current • High power Test systems and components
TECHNOLOGIES
PHENIX
R
ISO 9001
C
E
R
TIFIED
inp
UT
OUT
pUT
D
igi
TA
l
METER
ing
c
AB
lE
s incl
UDED
O
V
ER
lO
A
D
D
U
TY
c
Yc
lE
s
D
iM
En
si
O
n
s
&
W
Ei
g
H
T
sH
ip
pi
n
g
si
ZE
Voltage/Current
Voltage/Current
MODEl Hc1 Hc2 Hc3 Hc5
120 VAC, 20 Amp 120 VAC, 20 Amp
230 VAC, 10 Amp 230 VAC, 12 Amp
Frequency 50 Hz or 60 Hz (one must be specified)
0-120 VAC, 5 A 0-70 VAC, 25 A 0-15 VAC, 0-200 A 0-15 VAC, 0-333 A
0-24 VAC, 25 A 0-14 VAC, 125 A 0-7.5 VAC, 0-400 A 0-10 VAC, 0-500 A
0-6 VAC, 120 A 0-7 VAC, 250 A 0-3.75 VAC, 0-800 A 0-5 VAC, 0-1000 A
0-3 VAC, 240 A 0-3.5 VAC, 500 A
1000 A 2000 A 3000 A 5000 A
Short duration overloads are possible on each tap. Short duration overloads are possible on each tap.
The test set is capable of 1000 A (HC1), 2000 A (HC2), The test set is capable of 3000 A (HC3), 5000 A (HC5),
depending on the impedance of the test circuit. depending on the impedance of the test circuit.
Continuous @ 100% Continuous @ 100%
5 min ON/15 min OFF @ 200% 5 min ON/15 min OFF @ 200%
1 min ON/5 min OFF @ 300% 1 min ON/10 min OFF @ 300%
30 sec ON/5 min OFF @400% 10 sec ON/5 min OFF @400%
3 sec ON/5 min OFF @ 500% 3 sec ON/5 min OFF @ 500%
Currentmeter 3 1/2 digit LCD 4 1/2 digit LCD
Ranges 0-1.999/19.99/199.9/1999 A 0-1.9999/19.999/199.99/5000 A
Accuracy +/-1% Full Scale up to 2 A +/-1% Full Scale 0-2 A; 2000-5000 A
+/-0.5% Full Scale 2-2000 A +/-0.5% Full Scale 2-2000 A
Timer 6 digit LCD, in cycles or seconds 6 digit LCD, in cycles or seconds
Range 0-999999 cycles or 0-9999.99 seconds 0-999999 cycles or 0-9999.99 seconds
Accuracy +/-0.1% of reading +/- least significant digit +/-0.1% of reading +/- least significant digit
Length 20” (508 mm) 20” (508 mm) 21” (533 mm) 21” (533 mm)
Width 16” (406 mm) 16” (406 mm) 22” (559 mm) 22” (559 mm)
Height 14” (536 mm) 14” (536 mm) 46” (1168 mm) 46” (1168 mm)
Weight 64 lbs (29 kgs) 97 lbs (44 kgs) 219 lbs (99 kgs) 270 lbs (122 kgs)
Length 24” (610 mm) 24” (610 mm) 34” (864 mm) 34” (864 mm)
Width 21” (533 mm) 21” (533 mm) 27” (686 mm) 27” (686 mm)
Height 18” (457 mm) 18” (457 mm) 56” (1422 mm) 56” (1422 mm)
Weight 74 lbs. (34 kgs) 112 lbs (51 kgs) 280 lbs (127 kgs) 320 lbs (145 kgs)
Sense Leads (2) 5’ (1.5 m) Sense Leads (2) 5’ (1.5 m) Sense Leads (2) 8’ (2.4 m) Sense Leads (2) 8’ (2.4 m)
Low Current, Low Current, Low Current, Low Current,
10 ga. (2) 5’ (1.5 m) 10 ga. (2) 5’ (1.5 m) 10 ga. (2) 6’ (1.8 m) 10 ga. (2) 6’ (1.8 m)
High Current, High Current, Medium Current, Medium Current,
2 ga. (2) 5’ (1.5 m) 4 ga. (2) 5’ (1.5 m) 4 ga. (2) 4’ (1.2 m) 4 ga. (2) 4’ (1.2 m)
High Current, High Current, High Current,
4/0 (2) 5’ (1.5 m) 4/0 (4) 2’ (.6 m) 4/0 (4) 2’ (.6 m)
230 VAC, 25 Amp 230 VAC, 50 Amp