Atec Megger-DDA-6000 - Manual (Page 4)

DDA-3000 and DDA-6000
Universal Circuit Breaker Test Sets
Item (Qty) Cat. No.
Model DDA-3000 DDA-3000
Model DDA-3001 DDA-3001
Model DDA-3002 DDA-3002
Model DDA-6000 DDA-6000
Model DDA-6001 DDA-6001
Model DDA-6002 DDA-6002
Included Accessories
Standard stab sets CBS-1 and CBS-2
Leads
Timer leads,12 ft (3.7 m) [2] 2997
Input leads, 15-ft (4.5-m), 4/0 cable [2] 17163
Fuses
Fuse 500 V, 6 A [2] 9377
Fuse 250 V, 1.5 A [5] 950
Stab series bar [1] 5532
Instruction manual [1] 17176
Optional Accessories
Input autotransformer AT-1, AT-4
Leads included with input autotransformer
Interconnect leads, 10-ft (3-m), 4/0 cable [2] 17164
Jumper lead [1] 17527
Protective cover PC-1
Model CBS-3 stabs Contact Technical Sales
ORDERING INFORMATION
OPTIONAL ACCESSORIES
Protective Cover
A tough cover made of heavyweight, reinforced, vinyl-coated
nylon is available for protecting the test set from oil, dust or
other particulate matter during storage.
It conforms to Mil-C-43006D and passes Mil-C-20696B test for oil
and hydrocarbon resistance. It will withstand continuous
exposure to temperatures ranging from -40 to +180° F (-40 to +82°
C), and the fire-retardant material is treated with fungal and
ultraviolet ray inhibitors.
Input Autotransformer
If the nominal input voltage for the test set is not available, or if
use at different locations requires the use of a variety of input
voltages, an autotransformer may be used.
The multitapped autotransformer is equipped with a power on/off
switch, appropriate sockets, plugs, interconnect and tap selector
cables. It is housed in a rugged sheet-metal enclosure with casters
and handles.
All voltages are single-phase with a tolerance of ±5%. Input taps of
240 volts and below are not recommended for obtaining
maximum output of the test set. For other combinations of input
and output voltages, contact Megger.
Model
No.
WEIGHT
DDA-3000 Series 1000
1200
46 X 46 X 28 in.
46 X 55 X 28 in.
117 X 117 X 71 cm
DIMENSIONS
454
545
lb H X W X D (in.) H X W X D (cm) kg
117 X 140 X 71 cm DDA-6000 Series
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UNITED STATES
4271 Bronze Way
Dallas TX75237-1088 USA
T 800 723 2861 (USA only)
T +1 214 330 3203
F +1 214 337 3038
OTHER TECHNICAL SALES OFFICES
Valley Forge USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA, Madrid SPAIN
and the Kingdom of BAHRAIN.
Registered to ISO 9001:2000 Reg no. Q 09290
Registered to ISO 14001 Reg no. EMS 61597
DDA 3000_DDA 6000_DS_en_V10
www.megger.com
Megger is a registered trademark