Atec Quadtech-7000 Series - Manual (Page 2)

7400/7600
Measured Parameters: Any two of 14 parameters measured and
displayed simultaneously, user selectable
Test Frequency: 7400 Range: 10 Hz to 500 kHz, continuous
Resolution: 0.1 Hz from 10 Hz to
10 kHz, 5 digits>10kHz
Accuracy: +/-(0.002% + 0.02Hz)
7600 Range: 10 Hz to 2 MHz, continuous
Resolution: 0.1 Hz from 10 Hz to
10 kHz, 5 digits>10kHz
Accuracy: +/-(0.25% + 0.02Hz)
Measurement Speed: 7400 Basic: 40 meas/sec
Enhanced: 8 meas/sec
Extended: 1 meas/sec
7600 Fast: 25 meas/sec
Medium: 8 meas/sec
Slow: 1 meas/sec
Ranging: Automatic, Range Hold or user selectable
Trigger: Internal (automatic), External (RS-232,
IEEE-488.2 or Handler interfaces) and Manual
AC Test Signal: Voltage: 20 mV to 5.0 V (open circuit)
up to 500kHz in 5 mV steps
7600 20 mV to 1.0 V (open circuit)
500kHz-1MHz in 5 mV steps
20 mV to 0.5 V (open circuit)
>1MHz in 5 mV steps
Current: 250 µA to 100 mA (short circuit) in
50 µA steps
(Max. Compliance 3V < 500kHz.
Source Impedance: 25 Ω , 400 Ω , 6.4k Ω , or 100k Ω , range dependent
DC Bias Voltage: Internal: 2.0 V
External: 0 to +/-200V
0 to +/-500V on 7400A/7600A
Display: LCD Graphics with back light and adjustable
contrast
Result Formats: Engineering or scientific notation
% Deviation from nominal of primary parameter
Deviation from nominal of primary parameter
Pass/Fail
Binning summary
No Display for maximum throughput
Sweep Result: Primary parameter vs. frequency, voltage or
current
Graphical or Tabular Format
Up to 200 measurement points per sweep
Sequencing Result: Displays up to 6 sequential test results, primary
and/or secondary
AutoAcc: Automatic calculation and display of overall
instrument accuracy for selected settings, test
conditions and device under test
Standard Interfaces: IEEE-488.2, RS-232, Handler, Printer Port,
3.5" Disk Drive
Charged Capacitor Protection: √ 8/C for Vmax ≤ 250 V; √ 2/C for Vmax ≤ 1000V
C = Capacitance in farads of the device under test
Additional Fuse Protection on 7400C
Measurement Delay: Programmable from 0 - 1000 ms in 1 ms steps
Averaging: Programmable from 1 - 1000
Median value mode
Data Storage: 40,000 measurements/disk
ASCII format
DOS compatible
Program Storage: 125 per disk 25 setups internal
Password protected ASCII format
Calibration: Recommended Calibration Interval 1 year
Complete NIST Traceable Calibration using
QuadTech 7000-09 Cal Kit
Built-in automatic calibration procedure
Usage & Cal Data: Displays last calibration date, standard values
used in calibration and # of hours operation
Self-Test Routine: Verifies critical instrument operation at power-
up or when selected from menu
Contact Check: Time to detect, 2ms
Test Terminals: Front panel, four terminal (BNC) guarded
Mechanical: Bench mount with tilt bail
Dimensions: (w x h x d): 16 x 6 x 14in
(410 x 150 x 360mm)
Weight: 17 lbs (8kg) net, 23 lbs (10.5kg)
shipping
Environmental: Meets MIL-T-28800E, Type 3, Class 5,
Style E & F
Operating: 0 to + 50˚ C
Humidity: <75% for 11 to 30˚ operating
Storage: - 40 to + 71˚ C
Power: • 90 - 250Vac • 47/63Hz
• 100W max
For more detailed specifications, visit www.quadtech.com • For more information about special purchase, rent & lease options, call
1-800-253-1230 • Fax 1-508-485-0295 • Intl. 1-508-229-0806
5 Clock Tower Place, 210 East, Maynard, MA 01754
Pr
oduct Specif
ications
PN030087/A1
7400/7600 Precision LCR Meters
7600
LCR Meter
7600-CE LCR Meter, CE Marked
7600A LCR Meter, +/-500V External Bias
7600A-CE LCR Meter, +/-500V External Bias,
CE Marked
7400 LCR Meter
7400-CE LCR Meter, CE Marked
7400A LCR Meter, +/-500V External Bias
7400A-CE LCR Meter, +/-500V External Bias,
CE Marked
7400C LCR Meter, Charged Capacitor
Protection
7400C-CE LCR Meter, Charged Capacitor
Protection, CE Marked
Includes:
Instruction Manual
Power Cord
Calibration Certificate Traceable to NIST
Optional Accessories:
7000-00 Rack Mount Kit
7000-01 BNC Cable Set, 1 meter
7000-02 BNC Cable Set, 2 meters
7000-03 Kelvin Clip Leads
7000-04 Alligator Clip Leads
7000-05 Chip Component Tweezers
7000-06 Axial/Radial Lead Component
Test Fixture
7000-07 Chip Component Test Fixture
7000-08 High Voltage Test Fixture
7000-09 Calibration Kit
Ordering Information
Cs, Cp 00000.01 fF to 9.999999 F ±0.5% ±0.25% ±0.05%
Ls, Lp 0000.001 nH to 99.99999 H ±0.5% ±0.25% ±0.05%
D .0000001 to 99.99999 ±0.005 ±0.0025 ±0.0005
Q .0000001 to 999999.9 ±0.005 ±0.0025 ±0.0005
Z , Rs, Rp, 000.0001 m Ω to 99.99999 M Ω ±0.5% ±0.25% ±0.05%
ESR, Xs
Y , Gp, Bp 00000.01 µS to 9.999999 MS ±0.5% ±0.25% ±0.05%
Phase Angle -180.0000 to +179.9999 degrees ±1.8˚ ±0.9˚ ±0.18˚
Basic Measurement Accuracy*
Parameter Measurement Range Speed
Fast Medium Slow
*At optimum test signal levels, frequencies, DUT values and without calibration uncertainty.
Capacitance (Cs/Cp), Inductance (Ls/Lp), Resistance (Rs/Rp), Dissipation (D) and Quality (Q)
Factors, Impedance Z , Admittance Y , Phase Angle (0-), Equivalent Series Resistance (ESR),
Conductance (Gp), Reactance (Xs), Susceptance (Bp)
Note: s = series, p = parallel, ESR equivalent to Rs