Atec Fluke-87V - Manual (Page 3)

Fluke 83V and 87V detailed specifications Fluke Corporation 3
MIN MAX recording specifications
Model Nominal Response Accuracy
83V 100 ms to 80 % Specified accuracy ± 12 counts for changes > 200 ms in duration
(± 40 counts in ac with beeper on)
87V 100 ms to 80 % Specified accuracy ± 12 counts for changes > 200 ms in duration
(dc functions) > 25 % of range
120 ms to 80 % Specified accuracy ± 40 counts for changes > 350 ms and inputs
(ac functions)
250 µs (peak) Specified accuracy ± 100 counts for changes > 250 µs in duration
(Model 87 only) 1 (add ± 100 counts for readings over 6000 counts)
(add ± 100 counts for readings in Low Pass mode)
1 For repetitive peaks: 1 ms for single events.
Electrical characteristics of the terminals
Function Overload Input Impedance Common Mode Rejection Ratio
Protection 1 (nominal) (1 k Ω unbalance) Normal Mode Rejection
1000 V rms 10 M ΩΩ < 100 pF > 120 dB at dc, 50 Hz or 60 Hz > 60 dB at 50 Hz or 60 Hz
1000 V rms 10 M ΩΩ < 100 pF >120 dB at dc, 50 Hz or 60 Hz > 60 dB at 50 Hz or 60 Hz
1000 V rms 10 M ΩΩ < 100 pF > 60 dB, dc to 60 Hz
(ac-coupled)
Open Circuit
Full Scale Voltage Typical Short Circuit Current
Test Voltage To 6.0 M Ω 50 M Ω or 60 nS 600 Ω 6 k 60 k 600 k 6 M Ω 50 MΩ
1000 V rms < 7.3 V dc < 4.1 V dc < 4.5 V dc 1 mA 100 µA 10 µA 1µA 1 µA 0.5 µA
1000 V rms < 3.9 V dc 3.000 V dc 0.6 mA typical
1 10 6 V Hz maximum
Frequency counter sensitivity and trigger levels
Minimum Sensitivity (RMS Sine wave)
Approximate Trigger Level
Input Range 1 5 Hz - 20 kHz 0.5 Hz - 200 kHz (DC Voltage Function)
600 mV dc 70 mV (to 400 Hz) 70 mV (to 400 Hz) 40 mV
600 mV ac 150 mV 150 mV —
6 V 0.3 V 0.7 V 1.7 V
60 V 3 V 7 V ( ≤ 140 kHz) 4 V
600 V 30 V 70 V ( ≤ 14.0 kHz) 40 V
1000 V 100 V 700 V ( ≤ 1.4 kHz) 100 V
Duty Cycle Range Accuracy
0.0 to 99.9 % Within ± (0.2 % per kHz + 0.1 %) for risetimes < 1 µs
1 Maximum input for specified accuracy = 10X Range or 1000 V.
Frequency counter specifications
Function Range Resolution Accuracy
Frequency 199.99 0.01 Hz ± (0.005 % + 1)
(0.5 Hz to 200 kHz, 1999.9 0.1 Hz ± (0.005 % + 1)
pulse width > 2 µs) 19.999 kHz 0.001 kHz ± (0.005 % + 1)
199.99 kHz 0.01 kHz ± (0.005 % + 1)
> 200 kHz 0.1 kHz unspecified