Atec JDSU-SC-ADSL - Manual

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
SmartClass ™ ADSL
ADSL and IPTV Service Installation Tester
Key Features • All-in-one tool for broadband services installation, including
copper, ADSL 1/2/2+, IP data, and IP video testing
• Fast and easy CableCheck copper test for ADSL2+:
longitudinal balance, capacitance, DVOM, and loadcoil
counter
• Thorough ADSL analysis, including graphical bits-per-tone
and SNR-per-tone
• IPTV STB emulation and QoS testing for broadcast and VoD
services
• ADSL Through mode enables technician to analyze DSL
statistics while viewing the IPTV stream
• Full protocol suite to verify connectivity with ATM OAM F4
and F5, PPP, static and dynamic IP, DNS support, IP PING,
TRACERT, HTTP, and FTP
• Ethernet Terminal Equipment (TE) mode to quickly isolate
customer premises equipment (CPE); Through mode to
replace customer modem
The JDSU SmartClass ADSL is the ideal tool for the technician installing and
maintaining asymmetrical digital subscriber line (ADSL) services. The tester
enables the technician to test loop quality, verify ADSL signal and performance, and
validate the customer’s Internet connection with unprecedented ease and speed.
SmartClass ADSL provides a full set of copper tests that qualifies the customer
loop for the delivery of newer services such as Internet protocol television (IPTV)
including longitudinal balance, a key copper metric to ensure external noise and
interference will not impact the quality of the IPTV streams with intermittent
pixelization and other disruptive effects. Digital volt-ohm meter (DVOM),
distance-to-short, leakage, opens/capacitance, and loadcoil counter tests
guarantee the copper loop does not exhibit connection issues and that the quality
of the copper pair is within allowed standards for ADSL2+ transmission in terms
of loop length and isolation. The unique CableCheck sequence provides a very
easy and fast method to qualify the copper loop for ADSL2+ services with a
pass/fail indication and programmable thresholds. The full-featured ADSL tests
quickly verify provisioned rates and quality, including up/down actual and max
rates, margin, attenuation, capacity, TX power, errors, alarms, asynchronous
transfer mode (ATM) optical amplifier module (OAM) and stats, Ethernet stats,
and bipolar transistor (BPT) graphs.
In addition, the SmartClass ADSL supports the storage and retrieval of pre-set
configurations and allows technicians to transfer results to a person computer
using a universal serial bus (USB) connection. The instrument’s features,
including its rugged design and field-replaceable AA batteries, make it the
essential ADSL installation tool.
WEBSITE : www.jdsu.com/test