Atec Fujikura-fsm-30r12 - Manual

fusion splicing systems a
AFL Telecommunications
www.AFLtele.com or 1.800.235.3423
Specifi cations are subject to change without notice.
© 2002, AFL Telecommunications. All rights reserved.
6.24.03
features
• Wind protector design withstands 30 mph
cross wind
• Built-in programmable tube heater
• Slide-in power modules include AC
adapter, battery or camcorder battery
adapter
FSM-30R12
The FSM-30R12 offers Fujikura mass fusion technology in an extremely small and
lightweight mini-splicer. This splicer has the capability to splice single fi bers as well as
ribbons up to 12 fi bers. A wind protection hood, ambient condition sensors, and slide-in
modular powering units provide unprecedented mass fusion splicing in remote and outdoor
splicing locations. The FSM-30R12 offers a quick 30-second splicing time.
specifi cations
• Automatically adjusts fusion arc
to compensate for differences in
atmospheric pressure or altitude
• Large image magnifi cation on low-glare
5” color LCD monitor provides great fi ber
visibility
PARAMETER VALUE
Fiber Splicing Capability SM, MM, NZ-DS (non-zero dispersion-shifted) & DS fi bers (capable of splicing 2, 4, 6,
8, 10, or 12 fi bers simultaneously, as well as single fi ber splicing)
Splice Loss 0.04dB for SM, 0.02dB for MM, 0.07dB for NZ-DS fi ber (typical)
Return Loss >60dB
Fusion Splices Per Battery Charge ~30 (includes use of splice protection tube heater & hot jacket stripping tool)
Splice Sleeve Capability 40mm mass splice sleeves, both 40mm & 60mm single fi ber splice sleeves, and
micro/mini sleeves (10 programmable tube heater modes)
Altitude Compensation Function Fully automatic up to 3500 meters (11,500 feet)
Viewing Method 5” LCD color monitor with 40X magnifi cation, external RCA jack for NTSC video signal
Operating Temperature -10°C to +50°C
Storage Temperature -40°C to +80°C
Power Supply Modular bay accepts slide-in 12V 2.0 amp-hour battery pack or slide-in AC adapter.
AC adapter accepts 100 to 240 VAC (50/60Hz). Optional slide-in adapter for 12V 2.0
amp-hour camcorder battery.
Dimensions (W x D x H) 150mm x 150mm x 150mm (5.9” x 5.9” x 5.9”)
Weight 2.8 kg (6.2 lbs) with AC adapter installed; 3.2 kg (7.0 lbs) with battery installed
Splice Modes 24 pre-programmed, 30 user programmable