Atec Fujikura-FSM-17S - Manual

www.AFLtele.com or 1.800.235.3423
Specifi cations are subject to change without notice.
© 2004, AFL Telecommunications. All rights reserved.
9.01.04
fusion splicing systems
features:
• 35 second tube heater
• Dual direction monitor position
• Long life battery
(up to 160 splices/shrinks per charge)
• Automatic arc calibration
FSM-17S Fusion Splicer
The FSM-17S establishes a new standard for single fi ber “fi xed v-groove” type fusion
splicers with a host of improvements including a 35 second tube heater, dual position
monitor, and a longer battery life. The real time arc calibration feature makes fi eld main-
tenance easier than ever. Also available now is a version of the FSM-17S utilizing a fi ber
holder system, making the splicing process extremely simple for inexperienced techni-
cians. The FSM-17S is well suited for FTTX applications and both models quickly attach to
the newly redesigned ASW-02 workstation making, fi eld portability a breeze.
specifi cations
PARAMETER VALUE
Model FSM-17S: Fiber Sheath Clamp Model
FSM-17S-FH: Fiber Holder Model
Applicable Fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter 125µm
Coating Diameter FSM-17S: 250µm to 1000µm
FSM-17S-FH: 250µm using the FH-50-250 fi ber holder or 900µm using the
FH-50-900 fi ber holder
Fiber Cleave Length FSM-17S: 8 to 16mm with 250µm coating diameter.
16mm with 900µmcoating diameter.
Typical Average Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS.
Measured by cut-back method relevant to ITU-T and IEC standards.
Splicing Time Typical 11seconds with standard SM fi ber
Arc Calibration Method Automatic, using results of previous splice when in AUTO mode. Manual arc
calibration function available.
Splicing Modes 40 user programmable modes and up to 60 modes for reference (factory
predetermined setting).
Splice Loss Estimate Based upon dual camera cladding alignment data.
Storage of Splice Result The last 2000 results to be stored in the internal memory.
Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display options.
Magnifi cation 316x for single X or Y view, or 158x for X and Y view.
Viewing Method Dual cameras with 5.6 inch color LCD monitor.
Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 respectively.
Mechanical Proof Test 2N
Tube Heater Built-in tube heater with 10 heating modes and up to 20 modes for
reference.
Tube Heating Time Typical 35 seconds with FP-03 protection sleeve.
Applicable Protection Sleeve
Length 60mm, 40mm, micro
No.of Splice/heat With Battery Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11.
13.2V DC with BTR-06(S)/(L).
Terminals USB 1.1 (USB-B type) for PC communication.
Video terminal RCA video jack / NTSC.
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)
Weight 2.6 kg (5.7 lbs.) including AC adapter ADC-11
Changing Monitor Positions
Top and Front Monitor Positions