Atec Fujikura-FSM-80S User Manual
Page 2
account for accurate loss estimate.
Attenuation splice
function
Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for
an
inline fixed attenuator
Storage of splice result
The last 2000 results to be stored in the internal memory.
Magnification
X / Y (300X magnification), or both X and Y simultaneously (160X
magnification)
Viewing method
By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT
colour LCD monitor
Tension test
1.96 to 2.25N
Operating condition
0-5000m above sea level, 0-95% RH and -10 to 50°C r espectively.
Tube heater
Built-in auto-start tube heater with 10 heating modes and up to 20 for
reference
Tube heat time
13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes
are available
Applicable protection
sleeve length
60mm, 40mm and a series of micro sleeves.
No. of splice/heating
with battery
200 times of splicing and heat shrinking under with BTR-09
Power supply
Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18.
14.8Vd.c. with BTR-09
Terminals
USB2.0 ( Mini-B) for data and video signal transfer to PC.
Wind protection
Up to 15m/s wind velocity
Dimensions
146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot
Weight
2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life
3000 arc-discharges
Details
Standard Package
Item
Description
Model No.
Qty
1
Fusion Splicer
FSM-80S
with CLAMP-S70A
1 pc
2
AC adaptor/battery charger
ADC-18
1 pc
3
AC power cord
ACC-XX
1 pc
4
Spare Electrodes
ELCT2-20A
1 pair
5
Cleaver
CT-30A
1 pc
6
Battery Pack
BTR-09
1 pc
7
USB cable
USB-01
1 pc
8
Quick reference guide
M-80S/19S-E
1 pc
9
Warning and cautions
W-70-E
1 pc
10
Instruction Manual
M-70
1 pc
11
Alcohol Pot
AP-01
1 pc
12
Battery charge cord
DCC-18
1 pc
13
Carrying Case
CC-30
1 pc
14
Screw Driver
SD-01
1pc