Atec Ideal-LANTEK-6 - Manual

LANTEK ® 6 LAN Cable Certifier
LANTEK 6 is fully upgrade-
able to LANTEK 7, protecting
your investment and giving
you the maximum flexibility in
meeting your evolving
certification needs.
■ Fully compliant with
Category 6/ISO E draft
standards
■ Full Category 6/ISO E
AutoTest, with graphs in
approximately 25 seconds
■ Tests CAT 7/ISO F limits up
to 350 MHz
■ Advanced link adapter
method provides more
versatility and reduces cost
of ownership
■ Built in TDR ready for
copper and fiber
■ First fiber accessory for a
copper tester that traces
fiber runs, displays distance
to and magnitude of events
■ Display unit comes with
1/4 VGA color screen,
remote unit comes with
two-line black and white
LCD display
■ Serial and USB ports for
uploading tests and
upgrading firmware
■ Two full-function
PCMCIA slots accept
compact flash
memory and
provide for future
capabilities
LANTEK 6 is a fully compliant Category 6/
ISO E cable tester with a frequency range up
to 350 MHz. Performing full Category 6/ISO E
Autotests with graphs in approximately 25
seconds, LANTEK 6 will get you through
your jobs faster than ever. Plus LANTEK 6 is
fully upgradeable to LANTEK 7 giving you
maximum flexibility as test standards evolve.
LANTEK 6 utilizes an advanced link adapter
method to reduce cost of ownership.
LANTEK 6 comes with a pair of Category 6/
ISO E channel adapters. These channel
adapters fit into the case of the unit and are
locked in place. This creates a stable and
repeatable testing platform while eliminating
bulky adapters extending beyond the end of
the unit. By simply plugging in a Category 6/
ISO E reference patch cord to the channel
adapter, you can now perform Category 6/
ISO E permanent link testing. Should the
plug ever wear out the patch cord is
replaced rather than the entire assembly
reducing lifetime cost of ownership.
Among the LANTEK 6 accessories are the
the industry’s most advanced fiber options,
FIBERTEK and TRACETEK. FIBERTEK
enables loss, length, bi-directional testing
over two fibers, and talkset over fiber capa-
bilities for 850 and 1300 nm Multimode and
1310 and 1550 nm Singlemode fiber.
TRACETEK is the first fiber accessory
for a copper tester that will trace a
fiber run, locate distance to
events along the fiber, and
measure the magnitude of
the event. This capability
can eliminate the need
for a more costly OTDR
in campus network
environments.
LANTEK 6 Data.11/01 12/17/01 1:26 PM Page 1