Atec JDSU-NGC-4500 User Manual

Page 4

Specifications

Certifier40G: Next-GeNeratioN Cable Certifier

Test Parameters

Frequency range

1 to 2000 MHz

TIA-1152 Level IIIe and ISO/IEC 61935-1 Level-IV accuracy

Ordering Information

Part number

Description

NGC-4500-FA-xx

Copper kit

NGC-4500-MM-xx

Copper and multimode fiber kit

NGC-4500-MMSM-xx Class multimode fiber and single-mode

fiber kit

NGC-4500-6ACH2

CAT6A channel adapter pair

NGC-4500-6ALKIT2 CAT6A permanent-link testing kit
NGC-4500-6ALCORD2 CAT6A permanent-link test-cord pair
NGC-4500-MM2

Multimode adapter pair

NGC-4500-SM2

Single-mode adapter pair

NGC-4500-FACHKIT Class FA TERA channel test kit: two

TERA channel adapters plus one TERA-
TERA cable for “set reference”

NGC-4500-FALKIT

Class FA TERA permanent-link test kit:
two TERA PL adapters and two TERA-
TERA PL test cords

NGC-4500-FALCORD2 Pair of class FA TERA replacement PL

test cords

NGC-4500-BIX1

Single Belden BIX PL adapter

NGC-4500-GGFACHKIT Class FA GG45/AR45 channel test kit:

two GG45/AR45 channel adapters
plus one GG45-GG45 cable for “set
reference”

NGC-4500-PCORD2

CAT6A patch-cord adapter pair

NGC-4500-6PCORD2 CAT6 patch-cord adapter pair
NGC-4500-5PCORD2 CAT5E patch-cord adapter pair
NGC-4500-PCJACK2 CAT6A patch-cord replacement jack pair
NGC-4500-6PCJACK2 CAT6 patch-cord replacement jack pair
NGC-4500-5PCJACK2 CAT5E patch-cord replacement jack pair
NGC-4500-BAT1

Battery pack

NGC-4500-HCASE

Hard carrying case

Copper Cable Tests

Attenuation (insertion loss)
Near-end crosstalk (NEXT) in pair-to-pair and power-sum
Attenuation-to-crosstalk ratio far end (ACRF), pair-to-pair,
and power-sum
Return loss
Loop resistance
Wiremap and shield
Cable length
Total propagation delay
Delay skew between pairs

Fiber Cable Tests

Loss (in each direction)
Fiber cable length
Polarity

Environmental

Operating temperature

0 to 40°C

Storage temperature

−20 to 60°C

Relative humidity

10 to 80%

Connectivity

Probe interface connector
RJ45 Ethernet port
USB host and device interfaces
Talk set interface: 3.5 mm stereo jack

Test Standards

TIA -568-C.2 and TIA-1152 CAT-5, 5e, 6, 6A
ISO/IEC 11801, EN 50173 Class-C, D, E, EA, F, FA
TIA-568-C.3 Tier I Fiber certification
ISO/IEC 11801 Tier I Fiber certification

Power Supply

Removable/rechargeable lithium ion batteries provide up to
8 hours continuous operation
AC power adapter

100−240 V AC

Memory

More than 500 MB (more than 2000 test results) of internal
flash memory
1 GB USB flash drive included for flexible test record storage

Dimensions

Mainframe size

232 x 126 x 86.7 mm

(9.13 x 4.9 x 3.41 in)

Mainframe height approx. (per unit)

1.4 kg (3.0 lb)

Module size

84 x 70 x 27 mm

(3.3 x 2.8 x 1.1 in)

Pass/Fail Test Times

TIA CAT-6/CAT-6A test times

9 s

ISO Class -F/FA test times

15 s

TIA/ISO Tier I Fiber test time

8 s

Upgradable to add end-face inspection

* xx suffix indicates power-cord type for different

regions: NA, UK, EU, AU. Please specify regional cables:

North America (NA) Type A, European (EU) Type C,

United Kingdom (UK) Type G, Australian (AU) Type I.

Two complete units minimize time

initiating, naming, and saving results

USB flash drive sup-

ports transferring

test results

For more fiber testing and certification

capabilities, combine the Certifier40G

with one of the market-leading JDSU fiber

testers, such as the T-BERD®/MTS-2000.

Visit www.jdsu.com/go/Certifier40G for more information, vendor endorsements, and product videos.

Test & Measurement Regional Sales

NORTH AMERICA

TOLL FREE: 1 855 ASK-JDSU

(1 855 275-5378)

LATIN AMERICA

TEL: +1 954 688 5660

FAX: +1 954 345 4668

ASIA PACIFIC

TEL: +852 2892 0990

FAX: +852 2892 0770

EMEA

TEL: +49 7121 86 2222

FAX: +49 7121 86 1222

WEBSITE:

www.jdsu.com/test