Atec JDSU-NT1150 User Manual

Page 4

Test & Measurement Regional Sales

NORTH AMERICA

TEL: 1 866 228 3762
FAX: +1 301 353 9216

LATIN AMERICA

TEL: +1 954 688 5660
FAX: +1 954 345 4668

ASIA PACIFIC

TEL: +852 2892 0990
FAX: +852 2892 0770

EMEA

TEL: +49 7121 86 2222
FAX: +49 7121 86 1222

www.jdsu.com/know

OLP-5/6/8 P

ocket

-s

ized

Optical Power Meters

ValidatorPRO and ValidatorPRO-NT Ethernet Network Management Tools

General

Display

Color back-lit FSTN liquid crystal display (LCD)

Operating System

Linux

Keypad

Full navigations set with alphanumeric data entry

and soft-key functions

Memory Non-volatile memory: internal NAND flash memory

Volatile memory: 128 MByte DDR2 SDRAM memory

Languages supported (GUI) English, French, Italian, German,

Spanish, Portuguese, Korean, and Simplified Chinese

Interfaces
– USB 2.0 host port (for external memory sticks)
– Optical Power meter for 850/1300/1310/1490/1550 nm

wavelengths. -45 to +10dBm dynamic range for 850nm
and -50 to +10dBm for all other frequencies. ±0.20dB
accuracy. ±0.06dB linearity. Measured in dB or dBm. Auto
wavelength selection with 270, 330, 1k, 2kHz modulation

– Wi-Fi 2.4 GHz 802.11 b/g/n standards with MIMO technol-

ogy. Support 64/128-bit WEP encryption, WPA, WPA2, and
CISCO CCX security

Test Connectors
– 8-position shielded modular jack (data)
– 6-position modular jack (telephone)

ValidatorPRO NT1150
ValidatorPRO-NT NT1155

Specifications

– F-coax (video) Male connector w/sacrificial adapter
– 2.5 mm universal push pull (UPP) (Fiber)
Cable Types
– Shielded or unshielded twisted pair network cable
– Telephone
– Coax
– Single mode and multi mode fiber cable
Cable Length

Maximum cable length:

100 meters (1,500 ft)

Maximum cable length for testing of split pairs:

Up to 100 m

(327 ft),depending upon cable type

Cable length accuracy

±5% (after performing both

unit and cable calibration)

Electrical

Power sources:

AC adapter; auto cigarette lighter

power adapter; lithium-ion rechargeable,

removable batteries

Environmental

Operating temperature

0 to 50°C (32 to 122°F)

(normal operation, not charging battery)

0 to 45°C (32 to 113°F) (charging battery)

Storage temperature

–20 to 60°C (–4 to 140°F)

Operating humidity

10 to 85% RH,

non-condensing

Ordering Information (Models, options and accessories)

Part #

ValidatorPRO Ethernet speed certifier with integrated optical power meter

NT1150

ValidatorPRO-NT Ethernet speed certifier with integrated optical power meter including active network tests

NT1155

ValidatorPRO and ValidatorPRO-NT each include the following:

One smart remote, one set 1-8 wiremapping remotes (RJ11/RJ45) (TP612), two lithium-ion rechargeable batteries (NT93), two universal AC adapter/charger units, one 1.83 m (72 in) USB client-to-PC connection
cable (series A plug to series B plug), two 19 cm (7.5 in) RJ12-to-RJ12 cables for no-fault connection to RJ11 or RJ45 jacks, two 30.48 cm (1 ft) patch cables with RJ45 connectors, two 60.96 cm (2 ft) RJ45 to
8 alligator clips cord sets, two sacrificial cables for RJ45 mod plug, one coupler F-jack to F-jack, USB drive including Plan-Um cabling installation
and planning software, user guide (product manual), firmware, and quick start guide, Deluxe carrying case, Printed quick start guide, 100 “speed
certified” cable labels, one 12 V vehicle charger

Accessories

Lithium-ion rechargeable battery

NT93

1.83 m (72 in) USB cable assembly

NT94

Cable speed certified labels, roll of 100

NT95

19 cm (7.5 in) RJ12-to-RJ12 cable for no-fault connection to RJ11 or RJ45 jacks

TP20

30.48 cm (1 ft) patch cable with RJ45 connectors

TP55

F-connector plug to BNC jack adapter

TP62

60.96 cm (2 ft) RJ45 to 8 alligator clips cord set

TP68

Sacrificial cable for RJ45 mod plug

TP74

Set of 20 (1–20) Coax ID-only remotes

TP311

Set of 20 (1-20) RJ45 ID-only remote identifiers

TP312

Set of 20 (1-20) RJ11 ID-only remote identifiers

TP314

OLS-5 Optical MM LED Source 850/1300nm, ST connector type 2255/01
OLS-6 Optical SM Laser Source 1310/1550, FC connector type

2255/02

Inspection & Cleaning Kit 200/400X FBP Probe, HD3-P4 Display, FBPT Tips (SC, LC), FMAE Adapters, (U25M, U12M),
Bulkhead/Patchcord Cleaning Tools (2.5mm & 1.25mm), Case & power supply/charger

FBP-SM05-C

Inspection & Cleaning Kit - same as FBP-SM05-C but with HD3 Display

FBP-SM03-C

Visual Fault Locator - Pocket Size, 2.5mm (SM & MM)

FFL-050

1.25mm UPP adapter

FITP-UPP12

Shock and Vibration minimum

2 ft drop

(free fall from stationary) on concrete

Safety:

EN 61010-1

EMI/EMC:

EN 61326-1:2006

Altitude:

4000 m

Agency Certifications and Compliance

Main and Remote units:

Battery:

AC wall adapter:

CE, PSE, UL

Auto cigarette lighter power:

Calibration

Traceable Calibration Period:

2 Years

Self-Calibration Period:

30 days for unit calibration

Perform cable calibration whenever

changing cable type being measured.

Physical

Main Unit Size

22.9 x 11.4 x 5.3 cm (9 x 4.5 x 1.8 in)

Weight

710 gm (1 lb 9 oz) with battery

Remote

Size

14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 in)

Weight

341 gm (12 oz) with battery