Atec Fluke-DTX-NSM - Manual (Page 2)

The DTX-NSM module shows the traffic on the link-
under-test. The traffic is captured and analyzed every
second; the unit also tracks the average of each
parameter and a “high-water mark.”
N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details, go to
www.flukenetworks.com/contact .
© 2008 Fluke Corporation. All rights reserved.
Printed in U.S.A. 1/2008 2556864 D-ENG-N Rev C
View the Negotiation Details screen to see details of the
connection including PoE status.
Ordering Information
Model Description
DTX-NSM DTX Network Module:
includes one module that
plugs into the back of
the main unit of the
DTX CableAnalyzer
Verify link connectivity with key devices like severs
or gateways using the Ethernet Ping function.
Document all the network tests executed as an
integrated part of the cable certification documentation
provided by LinkWare.
Features
• Verify network service availability –
determines whether a telecom outlet
is active, identifies its data rates up to
1Gbps, and whether power is available
for PoE.
• Check link utilization and error
conditions – measures the utilization
of the link under-test as a percentage of
available bandwidth; identifies broadcast
traffic and the presence of network errors.
• Port identification – blinks switch/hub
port light; verifies if the link is connected
to the proper port or determines where a
work area outlet is connected.
• Verify link connectivity to the network
up to 1 Gigabit Ethernet – uses the
DHCP server to get an IP address,
Pings the default router and DNS Server
at 10Mbps, 100Mbps or 1Gbps. Or you
can assign IP addresses manually to
ping network devices.
• Verify PoE – verifies availability and
voltage levels for links connected to
power sourcing equipment to supply
powered devices for Power over Ethernet
applications such as VoIP and
Wireless Access Points.
• Documents both cabling link certification
and network availability and link
connectivity test results in a consolidated
report using LinkWare.
• Troubleshoot link – determines whether
performance problems are cabling or
network-related.
For more information about our Network SuperVision Solutions, call 800-283-5853 (US/Canada)
or 425-446-4519 (Other locations) or email [email protected].