Atec EXFO-FTB-5500 Series - Manual (Page 6)

SPECIFICATIONS (FTB-5500 PMD ANALYZER)
Model FTB-5502 FTB-5503 FTB-5523
Wavelength (nm) 1310 1550 1310/1550
Analysis range 1 (ps)
standard (typ.) 0.06 to 35 0.05 to 35 0.05 2 to 35
extended range (typ.) 0.06 to 200 0.05 to 200 0.05 2 to 200
(ER option)
Dynamic range 3 (dB) 45 (50) 4 40 (48) 4 32 (40) 4
Average measuring time (s) 15 15 15
GENERAL SPECIFICATIONS
(FTB-5500 PMD ANALYZER)
Temperature operating 5 to 40°C 41 to 104°F
storage
−
20 to 60°C
−
4 to 140°F
Relative humidity 0 to 80% non-condensing
NOTES
1. Measurement range is 0.1 to 115 ps with a calculated value lower than 0.1 ps
and estimated value higher than 115 ps.
2. With the 1550 nm light source.
3. At 1 ps.
4. With the M-2100 Broadband Light Source.
STANDARD ACCESSORIES
Instruction manual, PMD software, connector cleaners
SPFTBPMDAnalyzer.4AN 00/09
© 2000 EXFO Electro-Optical Engineering Inc. All rights reserved.
Printed in Canada
CORPORATE HEADQUARTERS 465 Godin Avenue, Vanier QC G1M 3G7 Canada Tel.: (418) 683-0211 Fax: (418) 683-2170
EXFO AMERICA 1201 Richardson Drive, Suite 260, Richardson, TX, 75080, USA Tel.: 1 800 663-3936 Fax: (972) 907-2297
EXFO EUROPE Centre d’Affaires Les Metz, 100, rue Albert Calmette, 78353, Jouy-en-Josas, France Tel.: +33 1 34 63 00 20 Fax: +33 1 34 65 90 93
EXFO ASIA Honkomagome 6-6-20 Bunkyo-Ku T-113 0021 Tokyo-To Japan Tel.: +81-3-5940-5410 Fax: +81-3-5940-5415
ISO 900
1 QUA LITY
ISO 900
1
EX FO
C
E RTIFIE
D
1 800 663-3936
[email protected]
www.exfo.com
ORDERING INFORMATION
FTB-300 Universal Test System PMD Analyzer module Polarized light source Broadband light source
FTB-300-XX FTB-55XX-XX-XX FLS-110-XXP-XX M21XX-BP-XX-XXX
Option code 02 = 1310 nm 02 = 1310 nm LED 02 =1300 nm
D2 = Active color matrix touchscreen 03 = 1550 nm 03 = 1550 nm LED 03 =1545 nm
M1 = 3.5 in. floppy disk 23 = 1310/1550 nm P = polarized
W1 = PCMCIA interface ER = extended range option Connector type BP = Polarized EELED
W2 = PCMCIA interface and 14.4 kBds fax/modem card 89 = FC/UPC singlemode fiber source
N3 = 4 MB memory upgrade (total of 20 MB) Connector type 90 = ST/UPC
89 = FC/UPC Connector code
N4 = 16 MB memory upgrade (total of 32 MB) 90 = ST/UPC 58 = FC/APC
Power code
115 V
220 V
SPECIFICATIONS
(FTB-300 UTS)
Display touchscreen, monochrome, 640x480 full dot LCD 9.4 in.
touchscreen, active matrix color, 640x480 full dot
LCD 8.4 in. (optional)
Interfaces RS-232
parallel printer
external VGA monitor
external keyboard (PS/2)
PCMCIA type II (optional, for fax modem card)
Memory 16 MB RAM, internal 2.1 GB hard drive
internal 3.5 in. 1.44 MB floppy drive (optional)
Batteries rechargeable NiMH battery pack (two batteries)
Four hours of continuous operation as per Bellcore
TR-NWT-001138
Power supply AC input: 90 to 250 V, 50/60 Hz
Size (H x W x D) 22.9cm x 30.5cm x 10.1 cm 9 in. x 12 in. x 4 in.
Weight 6.52 kg 14.35 lb.