Atec ILX-Lightwave-LDC-3916 - Manual (Page 11)

Specifications 1
MAINFRAME/GENERAL
Chassis Ground: 4mm Banana Jack
GPIB Connector: 24-pin IEEE-488.2
RS-232 Connector: 9-pin D-sub
Power Requirements: 50–60 Hz; selectable voltage
100 V, 120 V, 220 V, 240 V,
(+6%, –10%)
Size (HxWxD): 133 mm x 482 mm x 389 mm
5.25" x 18.98" x 15.3"
Weight (typical)
Mainframe: 20 kg (44 lbs)
With 8 Modules: 24 kg (52 lbs)
Operating Temp.: 0°C–40°C
Storage Temp.: –40°C to 70°C
Humidity: 2 20% to 85%
noncondensing
Laser Safety Features: Keyswitch, Interlock, Output
Delay: (Meets CDRH US21,
CFR 1040.10)
Display: Vacuum fluorescent,
64 x 128 pixels
83 mm x 41 mm
NOTES
1 See LDC-3916 brochure for module specifications.
2 Based on the vacuum fluorescent display
specification.
This product has passed all CE requirements and bears the CE mark.
In keeping with our commitment to continuing improvement,
ILX Lightwave reserves the right to change specifications without
notice and without liability for such changes.
LabVIEW ® is a registered trademark of National
Instruments.
ORDERING INFORMATION
LDC-3908 8-Channel Laser Diode Controller
Mainframe
LDC-3916 16-Channel Laser Diode Controller
Mainframe
LDC-3916371 High TEC Resolution 500 mA/9 W
Controller Module
LDC-3916372 500 mA/9 W Controller Module
LDC-3916374 1 A/9 W Controller Module
LDC-3916376 1.5 A/9 W Controller Module
LDC-3916332 500 mA/500 mA Dual Current Source
Module
LDC-3916334 1 A/1 A Dual Current Source Module
LDC-3916338 3 A Current Source Module
LDC-3916550 9 W/9 W Dual Temperature (TEC)
Controller Module
LDC-3916558 3 A (24 W) Temperature (TEC) Controller
Module
RM-137 Rack Mount Kit, 20.5" hole spacing
RM-138 Rack Mount Kit, 25" hole spacing
CC-305S Current Source/Laser Diode Mount
Interconnect Cable
CC-306S Current Source/Unterminated Interconnect
Cable
CC-316M Laser Current Cables (bundle of 8)
CC-501S TE Controller/Unterminated Interconnect
Cable
CC-505S TE Controller/Laser Diode Mount
Interconnect Cable
CC-516M TE Controller Cables (bundle of 8)
LNF-320 Low Noise Filter
LDM-4616 16-Channel Butterfly Mount
LDM-4604/xDIL DIL Module for LDM-4616 Mount
UCA-350 Unipolar Heater Control Adapter
LabVIEW ® Instrument Driver
When coupled with the LDM-4616 Modular
Laser Diode Mount, the LDC-3908 provides
a configurable, cost-effective solution for multi-
channel DWDM signal sources. The mount
also supports many popular 980 nm and
1480 nm pump laser diodes for EDFA test appli-
cations.
www.ilxlightwave.com
Rev. 3/1/01
P.O. Box 6310 Bozeman, MT 59771 • FAX: 406-586-9405
1-800-459-9459
For information call
International Inquiries: 406-586-1244
email: [email protected]
8-Channel
Laser Diode
Controller
LDC
3908