Atec Agilent-HP-81553SM - Manual (Page 2)

C
HP 81553SM Specications
Specications describe the instrument's warranted preformance . Supplementary
performance characteristics describe the instrument's non-warranted typical
performance .
Because of the modular nature of the instrument, these performance
specications apply only to this module . Y ou should insert these pages into the
appropriate section of the manual.
T able C-1. HP 81553SM Specications
Type FP-Laser
Central W avelength
[1]
1550nm620nm
Fiber Type single mode 9/125m
Spectral Bandwidth (RMS)
[2]
<4nm rms
Output P ower
[3]
>0dBm
CW-Stability
[4]
Short T erm (15min, T=Constant) 60.003dB
Long T erm (6h, T=0 to 55 C61K) 60.03dB
Operating T empreature 0 C to +55 C
Dimensions 75mm H, 32mm W , 335mm D
(2.8" 21.3" 213.2" 2)
W eight net 0.7kg (1.5lbs), shipping 1kg (2.2lbs)
Recalibration P eriod 1 year
[1]
Central W avelength is shown on the display .
[2]
rms: root mean square .
[3]
Class 3A according to IEC 825-1 (1993), Class 1 according to FD A CFR 21 (1986)
[4]
After a warm-up time of 60 min. with output enabled. If previously stored at
the same temperature , 20 min. only .
HP 81553SM Specications C-1