Atec ILX-Lightwave-MPS-8033 - Manual (Page 3)

You get more from ILX Lightwave
than just a laser source.
Typical output 24-hour stability data for the MPS-8033,
during which the ambient temperature varied by ± 1°C.
Precision Fiber
Optic Source
MPS
8033
Precision Fiber
Optic Source
MPS
8033
High Temporal Stability
and High Output Power
The MPS-8033 offers extremely high stabil-
ity—better than ±0.005 dB over 15 minutes and
±0.03 dB over 24 hours. The MPS-8033 is
also power adjustable over a 10 dB range
and capable of up to 20 mW of power into a
single mode fiber at WDM C-Band and L-Band
wavelengths. Precise internal laser diode tem-
perature control ensures low wavelength drift.
Operate in CW
Mode or
Internally
Modulated
Mode
The MPS-8033
series provides the
user with two laser
operating modes, CW
and modulated.
Internal modulation
frequencies 270 Hz,
1 kHz and 2 kHz are
selectable from the
front panel and 160 Hz to 15 kHz through
GPIB.
Plug and Play
The MPS-8033 is designed to get you up
and running quickly. That’s because we’ve inte-
grated the highest quality control circuits and
components to provide you with true turnkey
laser power coupled into an optical fiber.
The MPS-8033 sources conveniently display
output power in either milliwatts or decibels
(dBm). Decibel readings also can be displayed
relative to an operator-selected reference level.
In addition, bright, 4 digit front panel LED’s
ensure that power levels will be displayed
clearly.
Production Workhorse
For applications where stability and reliability
are expected, ILX’s precision laser diode tem-
perature and current control electronics make
the MPS-8033 Series Sources well suited for
exacting production and laboratory test and
measurement applications. These include active
and passive component testing for high-preci-
sion IL and ORL measurements, environmental
testing, power meter and detector calibration.
Automated
Production or
Laboratory Testing
For automated testing,
the standard GPIB inter-
face allows remote control
from a host computer.
In remote operating mode
all front panel functions
are accessible through the
GPIB bus as well as
increased display res-
olution with instrument
specific commands.
Meeting Production or Laboratory
Test Needs
The MPS-8033 Laser Diode Sources offers
even more wavelengths to suit your production
or laboratory test needs including 850, 980, and
1480 FP Laser Diode plus user selectable WDM
C-Band wavelengths from 1527.98–1564.26 nm
and L-Band from 1564.27–1610.06 nm.
Quality Products
With the MPS 8033, as well as with all of
ILX Lightwave Products, you not only get ILX’s
proven laser diode control technology, but also
our guarantee that our products meet or exceed
the performance specification requirements. We
have implemented computer automated work-
stations for most of our products and every
instrument undergoes a thorough final test and
calibration procedure.
Sales and Application Support
ILX employs an experienced technical sales
staff to help you with your production and labor-
tory test and measurement application. This
technical staff is backed with a wide variety of
application and technical notes. Access to our
staff and technical information is easy through
our toll free phone number or our website at
www.ilxlightwave.com.
Customer Service
ILX maintains a full-service repair and reca-
libration facility that process most instruments
within 48 hours. We can help when you need
installation support, product upgrades, instru-
ment repair and calibration. For demanding
production environments, we offer an on-site
calibration service.
International Support
Our international customers are supported
by an extensive network of technically qualified
distributors some who offer repair facilities and
a variety of electro-optical instruments, compo-
nents and systems in addition to ILX Lightwave
products.