Atec Rifocs-255A - Manual (Page 2)

1300nm LED Source
fiber TOOLS
RIFOCS Corporation
Fiber Optic Instruments & Components
1340 Flynn Rd. Camarillo, CA 93012
Phone: (805) 389-9800 Fax: (805) 389-9808
http://www.rifocs.com
™
255A
Specifications 1
Center wavelength:
Nominal 1300nm
Range (typical) 1270nm to 1345nm
Max. spectral width (FWHM) 150nm
Stability, 1 hour ±0.05dB
Power output into:
100/140µm GI MM -20dBm
62.5/125µm GI MM -20dBm 2
50/125µm GI MM -21dBm
9/125 SM -38dBm
Power output uncertainty ±0.5dB
Modulation frequencies 270Hz, 1kHz, and 2kHz ±0.5%
Power requirements Two AA-size 1.5V alkaline batteries provide
more than 24 hours of continuous operation
Connector interface Universal Connector Interface (UCI)
Environmental:
Operating temp. -15°C to +55°C
Storage temp. -35°C to +70°C
Humidity 0 to 95% RH, non-condensing
Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
Weight 215g (7.6 oz.)
CE EN61010; EN50081-1: 1992; EN55011, Group 1, Class A;
EN50082-1: 1992; IEC 801-2, -3, -4
1 Within specified ambient environment of +20°C to +25°C.
2 Calibrated launch level, Equilibrium Modal Distribution (EMD).
ISO 9001
Ordering Information
DS-HH255A Rev. A
One Universal Connector Interface (UCI) adapter is
included with the 255A LED source. Please specify
the desired connector adapter type when ordering
using the UCI Adapter Table, below. Additional UCI
adapters may also be ordered separately.
Part No. Description
255A 255A 1300nm LED source
90AC AC power converter
UCI Adapter Table
Adapter Code Connector Type
AD-234 DIN 47256
AE2-10 Diamond E-2000
APC-10 NTT/FC-PC
AMS-00 Diamond HMS-0 (3.5mm)
AMT-10 Diamond HMS-10A (SMA-2.5)
ASM-90 SMA-905/906
AHP-10 HMS-10/HP (2.5mm)
AML-38 MIL-T-29504/4 and /5
ASC-10 NTT/SC-PC
ATS-16 AT&T/ST-PC
Subject to change without notice