Atec Fluke-LS-1310-1550 User Manual
Service information sheet introduction, Precautions and safety information, Parts and service
PN 688967
November 1997, Rev. 1, 9/01
1997, 2001 Fluke Networks, Inc. All rights reserved. Printed in USA. Product names are trademarks of their respective companies.
LS-1310/1550
Laser Source
Service Information Sheet
Introduction
This Service Information Sheet provides the
following service information for the LS-1310/1550
Laser Source (hereafter referred to as "the laser
source").
•
Precautions and safety information
•
Parts and service information
•
Specifications
•
Cleaning procedures
•
Required equipment
•
Performance tests
•
Calibration adjustments
•
Diagrams showing calibration measurement
and adjustment points
•
Parts and accessories lists
For operating instructions, refer to the
LS-1310/1550 Laser Source Instruction Sheet.
Precautions and Safety
Information
•
Always clean the fiber optic connectors before
use.
•
Before testing, let the laser source stabilize for
2 minutes after you turn it on.
Warning: Class I Laser Product
To avoid injury, do not service the
source unless you are qualified to do so.
To avoid possible exposure to
hazardous laser radiation and to prevent
eye damage
Never look directly into the source
connector. Though the laser radiation is
invisible, it can damage your eyes.
Do not modify the source.
Do not magnify or otherwise modify the
laser output. Use only approved
connectors and adapters.
Do not use controls, adjustments, or
procedures not documented or approved
by Fluke Corporation.
Caution
While servicing the laser source, always
follow guidelines for preventing
electrostatic discharge (ESD). Otherwise,
ESD can damage sensitive components,
causing immediate or delayed failure of
the source.
Parts and Service
The source is warranted to be free from defects in
material and workmanship for one year, while
under normal use. Parts and repairs are warranted
for 90 days. Refer to the laser source instruction
sheet for the complete warranty statement.
To order parts, or for warranty service, contact
Fluke as follows:
U.S.A.: 1-888-993-5853
Canada: 1-800-363-5853
Europe: +31-402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-4519
For operating assistance in the USA, call
1-800-283-5853.
Visit the Fluke Networks web site at
Document Outline
- LS-1310/1550 Laser Source Service Information Sheet
- Introduction
- Precautions and Safety Information
- Parts and Service
- Specifications
- Cleaning the Optical Connector
- Required Equipment
- Performance Tests
- Calibration Adjustments for Serial Numbers 7913000
- Calibration Adjustments for Serial Numbers 7913000
- Parts and Accessories