Technical specifications, Ordering information – Atec Kaelus-RTF Series User Manual
Page 3
RTF analysis modes
Numeric: Distance to maximum PIM + PIM Magnitude
Graphical: PIM vs. Distance, Return Loss vs. Distance, PIM + RL vs. Distance
Return Loss
Max Return Loss (from FFT analysis) is displayed on the iQA main PIM test screen
when the RTF module is attached
Residual PIM
< -115dBm/-158dBc max (<-125dBm/-168dBc typ) @2x +43dBm test tones
User interface ports
1x USB, 1x Auxiliary port (Type N female)
1x RF output (7-16 DIN female), 1x RF input (7-16 DIN male)
Power
+12V DC supplied via iQA auxiliary port
RF power (PIM)
2x +43dBm supplied by iQA
RF power (Return Loss)
-33dBm supplied by RTF module
Dimensions
5.0 x 3.5 x 2.9in (127 x 90 x 73mm)
Weight
2.2lbs (1.0kg)
Operating temperature range
-10°C to +40°C
Storage temperature range
-20°C to +60°C
Ingress protection (IP)
IP50 (operating)
Relative humidity
5% to 95% RH non-condensing
MODEL
DESCRIPTION
IQA MODELS SUPPORTED
RTF-1000A
RTF Module , 698-960 MHz
700L, 700H, 850, 900, 901
RTF-2000A
RTF Module , 1710 – 2170 MHz
1800, 1900, 1921, 2101
• USB cable, Auxiliary port cable and carrying case included with RTF Module.
• A and B-series iQA PIM analyzers require a factory upgrade to be compatible with the RTF module.
Contact Kaelus customer service to request an RMA number before returning equipment for upgrade.
Upgrade part numbers are model and band specific. See list below for upgrade part number.
PART NUMBER
DESCRIPTION
RTF-U700LA
RTF upgrade for iQA-700LA analyzer
RTF-U700LB
RTF upgrade for iQA-700LB analyzer
RTF-U700HB
RTF upgrade for iQA-700HB analyzer
RTF-U850A
RTF upgrade for iQA-850A analyzer
RTF-U850B
RTF upgrade for iQA-850B analyzer
RTF-U900A
RTF upgrade for iQA-900A analyzer
RTF-U900B
RTF upgrade for iQA-900B analyzer
iQA UPGRADE
PART NUMBER
DESCRIPTION
RTF-U901B
RTF upgrade for iQA-901B analyzer
RTF-U1800A
RTF upgrade for iQA-1800A analyzer
RTF-U1800B
RTF upgrade for iQA-1800B analyzer
RTF-U1921A*
RTF upgrade for iQA-1900A & iQA-1921A analyzers
RTF-U1921B*
RTF upgrade for iQA-1921B analyzers
RTF-U2101B
RTF upgrade for iQA-2101B analyzers
www.kaelus.com
*The iQA1921 operates over the PCS and AWS bands; however the RTF function is limited to the PCS band only.
WARNING: Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be
a violation of licensing regulations. Users should have permission in advance, from any licensed operators that might be affected by these tests. Furthermore,
radiating high RF power can pose a personnel risk. Specifications subject to change without notice.
TECHNICAL SPECIFICATIONS |
© 2012 Kaelus Inc. All Rights Reserved. RevA_1.12
RTF MODULE
ORDERING INFORMATION |
|3|