Atec Kaelus-iQA-B Series - Manual (Page 2)

Mains power 115-230V, 50/60Hz AC
Power consumption 650W
Dimensions 19 x 18 x 12in (500 x 457 x 305mm)
Weight < 50lbs (22.7kg)
Cooling Forced air
Operating temperature range -10°C to +40°C
Storage temperature range -20°C to +60°C
Ingress protection (IP) IP20 (with lid open) IP21 (with lid closed)
Relative humidity 5% to 95% RH non-condensing
Mechanical shock 40G shock rating
DESCRIPTION TX RANGE RX RANGE (PIM)
iQA-700LB 700MHz (low) 728-746MHz 698-716MHz
iQA-700HB 700MHz (high) 728-757MHz 776-787MHz
iQA-850B 850MHz 869-894MHz 824-849MHz
iQA-900B GSM900 935-960MHz 890-915MHz
iQA-0901B EGSM 900 925-960MHz 880-915MHz
iQA-1800B DCS1800 1805-1880MHz 1710-1785MHz
iQA-1921B Dual band PCS/AWS 1930-1990MHz/2110-2155MHz 1710-1755MHz/1850-1910MHz
iQA-2101B UMTS (3rd & 7th order) 2110-2170MHz 1920-2080MHz
© 2011 Kaelus Inc. All Rights Reserved. Rev_2_11
www.kaelus.com
|2|
TECHNICAL SPECIFICATIONS CONTINUED |
ELECTRICAL
MECHANICAL
ENVIRONMENTAL
MODELS |
Vertical orientation for easy access
to user interface.
Self contained, ruggedized transport case.
WARNING: Use of the portable PIM analyzer in a radiating mode, for
example when connected to an antenna not enclosed in an anechoic
environment, may be a violation of licensing regulations. Users should
have permission in advance, from any licensed operators that might be
affected by these tests. Furthermore, radiating high RF power can pose
a personnel risk.
Specifications subject to change without notice.