30 series calibrator psi – Atec Crystal-IS-33 User Manual
Page 2
ENCLOSURE
All Models: Extruded aluminum with
polyester keypad and labels
Model 31≤600 PSI: 342 g (12.0 oz)
*
Model 31≤600 PSI: 428 g (15.0 oz)
Model 31≥1500 PSI: 360 g (13.0 oz)
Model 33: 400 g (14.0 oz)
*
Model 33: 485 g (17.0 oz)
SENSOR ≥ 1500 PSI
Wetted Materials: 316 stainless steel
Diaphragm Seal Fluid: Dow Corning® 200
Connection: Bottom,
1⁄
8
" female NPT
SENSOR ≤ 600 PSI
Wetted Materials: 316 stainless steel, Viton®
Anodized aluminum penetrated
with PTFE (polytetrafluoroethylene)
Diaphragm Seal Fluid: Dow Corning
®
200
Connection: Bottom,
1⁄
8
" female NPT
STORAGE TEMPERATURE
Temperature Range: -20°C to 70°C (-4°F to 158°F)
SPECIAL FEATURES
The following requires the use of ConfigM30 software
User defined unit: Allows the user to define and display any pressure units not included,
or to use the gauge to display force, level or other pressure related parameters.
Reduce or increase displayed resolution.
Remove: Unwanted pressure units from Units button.
Password protect: Changes to configuration or userspan calibration factor(s).
Save: Configuration to a file.
Copy: Configuration to other calibrators.
All welded with a permanently filled diaphragm seal.
Batteries should be removed if stored for more than
one month.
CERTIFICATIONS
ATEX
II 2G Ex ia IIC T4 Gb
FTZU 06 ATEX 0010 X
II 2G Ex ia IIC T4 Gb
IECEx FTZU 10.0018X
30 Series complies with the Electromagnetic Compatibility
and Pressure Equipment Directives. Refer to the EC Declaration
of Conformity for specific details.
C-tick
The instrument was tested against AS/NZS 3584,
C-tick EMC/EMI requirements.
30 Series is approved for use as a portable test instrument
for Marine use and complies with Det Norsjke Veritas’ Rules
for Classification of Ships, High Speed & Light Craft and
Offshore Standards.
This product conforms to:
EN60079-0: 2006
EN60079-11: 2007
This product conforms to:
IEC 60079-0: 2007
IEC 60079-11: 2006
All welded with a permanently filled diaphragm seal.
*
SPSS optional manifold.
Nylon carry case included.
30 Series PSI Data Sheet
4534 . C Page 2 of 3
30 Series Calibrator PSI