Atec Amplifier-Research-50W1000B - Manual (Page 2)

Page 2 of 2
SPECIFICATIONS, MODEL 50W1000B
RATED OUTPUT POWER ............................................... 50 watts minimum
INPUT FOR RATED OUTPUT .......................................... 1.0 milliwatt maximum
POWER OUTPUT @ 3dB COMPRESSION
Nominal
................................................................ 70 watts
Minimum ............................................................... 50 watts
POWER OUTPUT @ 1dB COMPRESSION
Nominal
................................................................ 55 watts
Minimum ............................................................... 40 watts
FLATNESS ..................................................................... ±1.0 dB typical
±1.5 dB maximum
FREQUENCY RESPONSE ............................................... 1-1000 MHz instantaneously
GAIN (at maximum setting) ........................................... 47 dB minimum
GAIN ADJUSTMENT (Continuous Range) ....................... 20 dB minimum (4096 steps remote)
INPUT IMPEDANCE ....................................................... 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE ................................................... 50 ohms, nominal
MISMATCH TOLERANCE * ............................................ 100% of rated power without foldback. Will operate without damage or
oscillation with any magnitude and phase of source and load impedance.
* See Application Note #27
MODULATION CAPABILITY ........................................... Will faithfully reproduce AM, FM, or pulse modulation appearing on the input
signal
HARMONIC DISTORTION ............................................. Minus 20 dBc maximum at 50 watts
THIRD ORDER INTERCEPT POINT .................................. 57 dBm typical
PRIMARY POWER (selected automatically) ....................... 90-132, 180-264 VAC
50/60 Hz, single phase
600 watts maximum
REMOTE INTERFACES ................................................... IEEE-488, RS-232
CONNECTORS
RF.......................................................................... Type N female
REMOTE CONTROL
IEEE-488 ............................................................. 24 pin female
RS-232 ............................................................... 9 pin Subminiature D (female)
REMOTE INTERLOCK .................................................... 15 Pin Subminiature D
COOLING .................................................................... Forced air (self-contained fans)
WEIGHT ....................................................................... See Model Configurations
SIZE (WxHxD)........ ........................................................ See Model Configurations
MODEL CONFIGURATIONS
MODEL RF INPUT RF OUTPUT WEIGHT SIZE (W x H x D)
50W1000B Type N female on front panel Type N female on front panel 25.9 kg (57.0 lb) 50.3 x 20.3 x 45.7 cm
19.8 x 8.0 x 18.1 in
50W1000BM1 Type N female on rear panel Type N female on rear panel 25.9 kg (57.0 lb) 50.3 x 20.3 x 45.7 cm
19.8 x 8.0 x 18.1 in
50W1000BM2 Same as 50W1000B with enclosure removed for rack mounting 16.4 kg (36.0 lb) 48.3 x 17.8 x 46.0 cm
19.0 x 7.0 x 18.1 in
50W1000BM3 Same as 50W1000BM1 with enclosure removed for rack
mounting
16.4 kg (36.0 lb) 48.3 x 17.8 x 46.0 cm
19.0 x 7.0 x 18.1 in
50W1000BM4 Same as 50W1000BM2 with gain control removed 16.4 kg (36.0 lb) 48.3 x 17.8 x 46.0 cm
19.0 x 7.0 x 18.1 in
50W1000BM5 Type N female on front panel Type N female on rear panel 16.4 kg (36.0 lb) 48.3 x 17.8 x 46.0 cm
19.0 x 7.0 x 18.1 in Enclosure removed for rack mounting