Atec Agilent-11970A - Manual

Exceptional performance
The Agilent Technologies 11970 series harmonic
mixers are general purpose mixers employing a
dual-diode design to achieve very flat frequency
response and low conversion loss. Each mixer is
calibrated across its full band:
11970K, 18 to 26.5 GHz
11970A, 26.5 to 40 GHz
11970Q, 33 to 50 GHz
11970U, 40 to 60 GHz
11970V, 50 to 75 GHz
11970W, 75 to 110 GHz
This series of mixers has been designed for a local
oscillator frequency of 3 to 6.1 GHz. Accurate
absolute amplitude measurements can be made by
using the mixer’s conversion loss calibration chart.
The SWR of the waveguide input is typically 2.2:1
to further minimize measurement uncertainty. The
combination of high gain-compression level and low
conversion loss provides the maximum dynamic
range for measuring input signals.
Agilent 11970 Series
Harmonic Mixers
Data Sheet
For use with the Agilent E4407B, 8560E/EC Series,
8566B, and 71000 Series Spectrum Analyzers
• Excellent frequency response
• Low conversion loss
• No bias or tuning adjustments
• High safe input level, 100 mW
• Amplitude calibrated
18 to 110 GHz
11970K, 11970A,
11970Q, 11970U,
11970V, 11970W