beautypg.com

Model 5011, Terminating power sensor (tps) – Atec Bird-5011 User Manual

Page 2

background image

Bird® Technologies Group combines the industry leading brands of both Bird Electronic and TX RX Systems and is a global, innovative supplier of RF products, systems, services and

educational solutions. Bird

®

Technologies Group reserved the right to modify specifications or discontinue any product without notice.

www.bird-technologies.com

440.248.1200/866.695.4569

[email protected]

Model 5011

Terminating Power Sensor (TPS)

POWER MEASUREMENT CHARACTERISTICS

Frequency Range:

40 MHz to 4 GHz

Power Measurement Range:

-20.000 to +10.000 dBm (10.000ìW to 10.000mW)

Peak/Average Ratio:

12 dB maximum

Accuracy:

±5% of reading ±1mW RSS (excluding mismatch uncertainty)*

Warm Up Time:

5 Minutes

Input Impedance:

50 Ohms (nominal)

Input VSWR:

Typical 1.03 (36.6 dB return loss); maximum 1.20 (20.8 dB return loss)

Input Connector:

Precision N Male

Output Connector:

Male DB-9 to interface to Digital Power Meter or Site Analyzer

Power Supply

From host instrument via cable connection

PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS

General:

Terminated average power measurement

Operating Temperature:

-10° to +50°C (+14° to +122°F)

Storage Temperature:

-40° to +80°C (-40° to +176°F)

Mechanical Shock:

IAW MIL-PRF-28800F class 3

Vibration:

IAW MIL-PRF-28800F class 3

Humidity:

95% maximum (non-condensing)

Altitude:

15,000 ft operating

Safety:

Complies with EN-61010-1:1995 including Amendment 2
IAW Low Voltage Directive (73/23/EEC)

EMC:

Complies with EN 61326-1:1997 IAW EMC Directive
(89/336/EEC)

Size:

6” long (including connectors); 1.5” diameter

Weight:

3/4 lb. Maximum

* When operating below 100 MHz and above 40°C, add 1%.

Model 5011 Accessories

Part #

Description

8353A040-50

50 W Attenuator, 40 dB, N(M) to N(F)*
Note: For 100 mW to 50 W TPS applications

8353A030-10

10 W Attenuator, 30 dB, N(M) to N(F)*
Note: For 10 mW to 10 W TPS applications

4240-500-1

Adapter, N(F) to N(F)

4240-500-3

Adapter, N(F) to N(M) Right Angle

4240-500-4

Adapter, N(F) to SMA(F)

4240-500-5

Adapter, N(F) to SMA(M)

PA-FNME

Adapter, N(F) to 7/16 DIN(M)

PA-FNFE

Adapter, N(F) to 7/16 DIN(F)

TC-MNFN-1.5-G

Test Cable, 1.5 Meters, N(F) to N(M)

TC-MNFN-1.5

Test Cable, 1.5 Meters, N(F) to N(M), Armored,
Phase-Stable

TC-MNFN-3.0

Test Cable, 3.0 Meters, N(F) to N(M), Armored,
Phase-Stable

5011A035-1

DC Block

5011-CALDATA

Calibration Data for TPS Accessories
Recommended for attenuators, test cables,
dc block and right angle adapter

Model 5000 EX Accessories

5A2238-1

Cigarette Lighter Adapter

5000-030

Soft Carrying Case

5000-035

Hard Carrying Case

For additional accessories:

• SA-EX Series - see www.bird-electronic.com/products/pdfs/568-

exseries-0305.pdf

• Model 5000-EX - see www.bird-electronic.com/model 5000 product

information/brochure

Contact factory to inquire about special orders to meet your specific
application needs: Visit us at www.bird-electronic.com

NOTE: The BIRD Model 5000-EX or the Bird Site Analyzer™ Series is required.