Atec Agilent-87405A - Manual (Page 3)

3
87405A product specifications
Frequency Range 10-3000 MHz
Small Signal Gain 22-27 dB min-max
Gain Flatness ±1.25 dB 50-3000 MHz
±2.0 dB 10-3000 MHz
Output Power (1 dBC) 4 dBm
Noise Figure 6.5 dB 10-2000 MHz
7.5 dB 2000-3000 MHz
Third Order Intercept (TOI) 15 dBm typical
Harmonics 20 dBc typical
(@ +4 dBm output power)
Input VSWR 1.5:1 10-1000 MHz
1.7:1 1000-2000 MHz
2.0:1 2000-2900 MHz
2.2:1 2900-3000 MHz
Output VSWR 2.0:1
Impedance 50 ohms nominal
Reverse Isolation 60 dB typical
Survival Input Power (max) +13 dBm typical
Power Dissipation 1.2 W nominal
Temperature (operating) 0 to +55°C
(storage) -40 to +70°C
Specifications describe the instrument’s warranted performance over the tempera-
ture range 0°C to +55°C (unless otherwise noted). All specifications apply after
the instrument’s temperature has been stabilized after one hour continuous oper-
ation. Typical characteristics are intended to provide information useful in apply-
ing the instrument by giving typical but nonwarranted performance parameters.
These are denoted as “typical” or “nominal” and apply over the temperature
range 0°C to +55°C.
Caution : Electrostatic Discharge (ESD) can damage or destroy electronic compo-
nents. It is recommended that this preamplifier, like other electronic components,
be installed and operated at a static-free workstation or in an environment where
precautions against ESD have been implemented.
General specifications
Bias Voltage and Current 15 ±6% Vdc @ 80 mA
nominal
Connectors RF Type N(f) in, N(m) out
DC Probe Power Connector (f)
Weight net 270 g, shipping 510 g
Environmental information
EMC IEC 801-2/1991 IEC 801-4/1988
IEC 801-3/1984 CISPR-11/1990
Moisture Resistance 65°C at 95% RH for 10 days per
Mil-Std-883C method 1004.5
Random Vibration 5.2 G (rms) to 2000 Hz per Mil-Std-
883C method 2026-11A
Shock 1500 G (peak), 0.5 ms per Mil-Std-
883C method 2002.3-B
Altitude, non-operating 15,000 meters per Mil-Std-883C
method 1001-C .