Atec AH-Systems_PAM-2640 User Manual
Pam-2640, Ah systems, Specifications
AH Systems
PAM-2640
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own
power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come
with a 15-volt DC regulated power source. A low voltage indicator confidently allows you to power the amplifier with
your own external 15-volt DC battery. This makes it a convenient choice for field measurements. See table below for
amplifier specifications.
Specifications
Amplifier Type
Low Noise Amplifier; Broadband Preamplifier
Applications
Mobile / Wireless Systems; EMC/EMI Testing
Primary Performance Specifications
Frequency Range
26000 to 40000 MHz
Minimum Gain
16.00 dB
Maximum Gain
22.00 dB
Gain Flatness
1.40 dB
Input VSWR
1.70 :1
Output VSWR
1.70 :1
Dynamic Range
Noise Figure
4.50 dB
Amplifier Package
Package Type
Connectorized
Connectors
2.9mm
Electrical Characteristics
Operating Voltage
15.00 volts
Operating Voltage
15.00 volts
Operating current
0.1800 amps