Atec B-K-8500 Series - Manual (Page 6)

6 w w w.bk prec ision.c om
DC Electronic Loads
Models 8500, 8502, 8510, 8512, 8514, 8518, 8520, 8522, 8524, 8526
Common characteristics ▲
v061813
Standard
Power cord, user manual, installation CD with application software, RS232 to TTL serial converter cable IT-E131,
USB to TTL serial converter cable IT-E132
Optional Rack mount kit IT-E151 for models 8500, 8502, 8510, 8512, 8514 and 8518 only
Model Dimensions (W x H x D) Weight
8500 8.46” x 3.46” x 14” (215 mm x 88 mm x 355 mm) 11.5 lb (5.2 kg)
8502 8.46” x 3.46” x 14” (215 mm x 88 mm x 355 mm) 11.5 lb (5.2 kg)
8510 16.9” x 3.46” x 14” (429 mm x 88 mm x 355 mm) 31 lb (14 kg)
8512 16.9” x 3.46” x 14” (429 mm x 88 mm x 355 mm) 31 lb (14 kg)
8514 16.9” x 3.46” x 14” (429 mm x 88 mm x 355 mm) 31 lb (14 kg)
8518 16.9” x 3.46” x 14” (429 mm x 88 mm x 355 mm) 31 lb (14 kg)
8520 17.48” x 7.09” x 21.22” (444 mm x 180 mm x 539 mm) 66 lb (30 kg)
8522 17.48” x 7.09” x 21.22” (444 mm x 180 mm x 539 mm) 66 lb (30 kg)
8524 17.48” x 14.06” x 21.22” (444 mm x 357 mm x 539 mm) 148 lb (67 kg)
8526 17.48” x 14.06” x 21.22” (444 mm x 357 mm x 539 mm) 148 lb (67 kg)
Parameter Range Accuracy Resolution
CR Mode Regulation
(Input current ≥ FS 10%
Input voltage≥ FS 10%)
0.1 -10 Ω ±(1%+0.3% FS) 0.001 Ω
10-99 Ω ±(1%+0.3% FS) 0.01 Ω
100-999 Ω ±(1%+0.3% FS) 0. 1 Ω
1K-4 KΩ ±(1%+0.8% FS) 1 Ω
CW Mode Regulation
(Input current ≥ FS 10%
Input voltage≥ FS 10%)
0-100 W ±(1%+0.1% FS) 1 mW
100 W - max power ±(1%+0.1% FS) 100 mW
Power Measurement
(Input current ≥ FS 10%
Input voltage ≥ FS 10%) 0-100 W ±(1%+0.1% FS) 1 mW
100 W - max power ±(1%+0.1% FS) 100 mW
Other
Battery testing function
Input = 0.1 V – 120 V, Max measurement capacity = 999 Ah
Resolution = 10 mA, Timer range = 1-60000 sec
Transition mode Range of Frequency 0.1 Hz-1 kHz, Frequency error rate 0.5%
* All 8500 series models, with the exception of models 8524 and 8526, can be configured for 110 V or 220 V operation via the AC line switch in the rear
panel. Base models 8524 and 8526 operate with 110 V only. For 220 V operation, order model 8524-220V or 8526-220V respectively. “-220V” denotes
220 V operation only and these models cannot be reconfigured for 110 V operation.
Mechanical specifications
Accessories
Power input 110 / 220 (see note below)* VAC ± 10%, 47 – 63 Hz
Operating temperature 32 ºF - 104 ºF (0 - 40 ºC)
Storage temperature 50 ºF - 140 ºF (10 - 60 ºC)
Humidity ≤ 95% relative humidity, non-condensing
Safety EN61010-1:2001, EU Low Voltage Directive 73/23/EEC amended by 93/68/EEC
Electromagnetic compatibility Meets EMC Directive 89/336/EEC amended by 93/68/EEC, EN50081-1, EN50082-1
One-Year Warranty
▲
▲