Atec AEMC-SR651 - Manual (Page 2)

AC Current Probe Model SR651 (pdf) Rev. 03 10/03
Technical Assistance (800) 343-1391 www.aemc.com 2 of 4
Specifications
MODEL SR651
ELECTRICAL
Nominal Range 1000A
Measurement Range 0.1 to 1200A
Transformation Ratio Voltage output
Output Signal 1mV/A AC /A AC (1V AC @ 1000A)
Accuracy (1000A Range)
1 to 50A ≤3% ± 0.1A
50 to 200A 1.5% of Reading
200 to 1000A 0.75% of Reading
1000 to 1200A 0.5% of Reading
Phase Shift (1000A Range)
50 to 200A 1.5°
200 to 1000A 0.75°
1000 to 1200A 0.5°
Overload 1200A for 40 min ON, 20 min OFF
Frequency Range 30Hz to 5kHz; current derating above 1kHz using the formula: 1000A x 1/F (in kHz)
Load Impedance 100kΩ min
Crest Factor ≤6
Working/Common
Mode Voltage:
600V Cat. III
Output Termination Jack
MECHANICAL
Operating Temperature -14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 158°F (-20° to 70°C)
Operating Relative
Humidity
0 to 85% @ 35°C
Jaw Opening 2.25" (57mm) max
Maximum Conductor Size 2.05" (52mm)
Maximum Bus Bar Size One 1.95 x 0.19" (50 x 5mm)
Dimensions 4.37 x 8.50 x 1.77" (111 x 216 x 45mm)
Weight 1.21 lbs (550g)
Polycarbonate Material Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0
SAFETY
Electrical EN 61010-2-032
CE Mark Yes
Note: Reference conditions:
23 ± 3°K, 20 to 75% RH, 48 to 65Hz, external magnetic field < 40A/m, no DC component, no external current carrying conductor,
test sample centered. Load impedance 1
Ω .