Atec Aemc-OX-7202-7204 - Manual

64 www.aemc.com Technical Assistance (800) 343-1391
Features
• 5 complementary tools in a single
instrument: Oscilloscope, FFT Analyzer,
Multimeter/Wattmeter, Harmonic Analyzer
on voltage/current/power and Recorder
• Sampling rate 2.5GS/s in one-shot mode and
100GS/s in ETS mode (repetitive signals)
• 2 or 4 isolated measurement channels
(600V CAT III) and up to 8 traces on screen
• 2 or 4 independent TRMS digital multimeters
(8000 counts, 200kHz)
• LCD touch screen and Windows-like
menus on screen
• Probix “plug & play” input terminals
and smart sensors
• Standard “real-time” FFT analysis and
calculation functions on channels
• Multi-interface communication connectors:
RS232, Centronics and Ethernet
• Memory depth of up to 50,000
points per channel (Oscilloscope
and Recorder modes)
• Triggering on measurement
thresholds in Oscilloscope and
Multimeter modes
• NEW – Adapter for
measuring up to 700V
ac
RMS 1000V
dc
in meter mode
• NEW – Web Server
(FTP server/client) with
cursors and automatic
measurements
• NEW – MiniFlex ® sensors,
powered by the instrument
• NEW – Power measurement
option included for your
power measurements
• NEW – Adapter for
measuring up to 700V
ac
RMS 1000V
dc
in meter mode
Handheld Oscilloscope
Models OX7202 III & OX7204 III
200MHz
Model OX7202 III Kit
NEW! NEW! NEW! NEW! NEW!
3 3
W
AR
R AN
T
Y
YEAR
OSCILLOSCOPES
SPECIFICATIONS
MODELS OX7202 III OX7204 III
InteRFace
Screen Specifications Color 5.7" LCD (115 x 86mm) 320 x 240 – CCFL backlighting
Display Mode Vectors with interpolation
no. of Traces on Screen Four traces and four references – split screen and full screen modes (tracing zone 110 x 74)
Front Panel Control 32 direct shortcuts
Screen Control Touch screen – "Windows-like" menus and graphic commands
veRtIcal
Vertical Sensitivity 16 ranges from 2.5mV – 200V/div and up to 156µV/div in verticle zoom mode
(12-bit converter) – Accuracy ± 1% of Reading
Bandwidth 200MHz
Channels Two isolated channels Four isolated channels
Accuracy ±0.1% of Reading
Input Impedance 1M Ω ± 0.5%
Max Input Voltage 600V dc , 600Vrms, 850Vpk (DC + peak AC at 1kHz) without 10/1 probe
1000Vrms with 10/1 probe
derating -20 dB/decade from 100kHz to 200MHz
Vertical Zoom x5 maximum
hoRIzontal
Time Base Speed 35 ranges from 1ns/div to 200s/div
Accuracy accuracy ± 0.1% - Roll mode from 100 ms to 200 s/div
Horizontal Zoom x100 maximum
dIgItal MeMoRy
Max. Sampling Speed 100GS/s in ETS – 2.5GS/s in Single Shot Mode on each channel
Vertical Resolution 12 bits
Memory Capacity per Channel “TRC” approx. 10kB, “TXT” approx. 20kB
User Memory 2MB
Other Modes Envelope mode (Factors from 2 to 64)
Xy Mode Between two from the four traces – math functions and cursors
otheR FunctIons
Autoset Complete autoset < 3s with recognition of channels, Frequency >30Hz
Trigger Mode Automatic Triggered, Single shot, Auto Level 50%
FT Analyzer & Math Functions FT, +, –, x, / – Editor of mathematical functions
Cursors Two or three cursors: V and T simultaneous or Phase Resolution 12 bits, display four digits
Power Source Rechargeable 9V 3.8Ah battery (included)
Battery Life Four hour operation when fully charged
Communication Ethernet, RS-232, Web Server