Atec EM-Test-EFT-500N8 Series - Manual

DATA SHEET > EFT 500N8 > 20130626
EFT 500N8
ELECTRICAL FAST TRANSIENT GENERATOR
FOR TESTS ACCORDING TO ...
> EN 61000-4-4
> EN 61000-6-1
> EN 61000-6-2
> IEC 61000-4-4
> IEC 61326
> IEC 61850-3
EFT 500N8 - EFT/BURST TESTER
The EFT 500N8 is the state-of-the-art EFT/Burst tester with a built-in coupling/decoupling network for single phase or
three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.
The spike frequency can be varied from as low as 100Hz to 1,000kHz. The EFT 500N8 is capable to generate 1,000 spikes per
second or up to 150 spikes per burst.
Its performance fully complies with IEC 61000-4-4:2004, IEC 61000-4-4 Amd.1 Ed.2:01/2010 and IEC 61000-4-4 Ed.3:
03/2012. Pre-programmed Standard Test routines and a number of selected User Test routines make the EFT 500N8 an
optimum standalone solution for both testing during development and final testing of products and sub-assemblies.
HIGHLIGHTS
> Standalone Tester
> 7,000V Burst voltage
> Spike frequency 1MHz
> Built-in 1ph or 3ph coupler
> USB (optical link) and GPIB interface
> Standard Test routines
APPLICATION AREAS
INDUSTRY
MEDICAL
BROADCAST
RESIDENTIAL
TELECOM
COMPONENTS
www.emtest.com © EM TEST > PAGE 1/4